574B Forwarder Caterpillar


Transmission Gearbox Oil Sample - Obtain

Usage:

574B CZZ
Operate the machine for a few minutes before you obtain the fluid sample. This will thoroughly mix the fluid for a more accurate sample.


Illustration 1g00903017

The transmission gearbox is not equipped with a sampling valve. Obtaining a sample of the oil will require a vacuum pump or an equivalent. Withdraw the oil through the dipstick tube.

Reference: For more information, refer to Special Publication, PEHP6001, "How To Take A Good Oil Sample".

Caterpillar Information System:

574B Forwarder Hydraulic System Oil Sample - Obtain
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Specifications
574B Forwarder Grapple Damper Brake - Inspect/Adjust
574B Forwarder Grapple Damper - Lubricate
574B Forwarder Fuel System Primary Filter - Replace
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Caterpillar Approved Machines
574B Forwarder Fuel System - Prime
574B Forwarder Final Drive Oil Sample - Obtain
574B Forwarder Engine Oil Sample - Obtain
574B Forwarder Differential Oil Sample - Obtain
574B Forwarder Cooling System Sample - Obtain
574B Forwarder Bogie Oil Sample - Obtain
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Plate Locations and Film Locations
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Daily Inspection
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Work Tool Installation and Removal
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Operation
2002/12/23 Washer Pump Assemblies Must Be Primed Properly {7306}
2003/01/20 Kits are Available for Servicing 105-4324 Air Starting Motor Gp {1451}
R1300G Load Haul Dump Hydraulic System Main Hydraulic System
R1300G Load Haul Dump Hydraulic System Main Control Valve
R1300G Load Haul Dump Hydraulic System Relief Valve (Lift Circuit)
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Shutoff Valve (Axle Lock) - Remove and Install
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Fuel Tank - Remove
CB-534D and CB-564D Asphalt Compactors Steering Cylinder Ends - Lubricate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.