Specifications
Show/hide table
Specifications | PC205 | PC206 | PC210 |
Planing Width | |
|
|
Maximum Cutting Depth | |
|
|
Side Shift Travel | |
|
|
Tilt Angle Range | +/- 8.5° | +/- 8.5° | +/- 8.5° |
Weight | |
|
|
Optimum Hydraulic Flow | to |
to |
|
Optimum Hydraulic Pressure | |
|
|
Show/hide table
Specifications | PC305B | PC306B | PC306B XD | PC310B | PC310B XD | PC408B | PC412B |
Planing Width | |
|
|
|
|
|
|
Maximum Cutting Depth | |
|
|
|
|
|
|
Side Shift Travel | |
|
|
|
|
|
|
Tilt Angle Range | +/- 8° | +/- 8° | +/- 5.5° | +/- 6.5° | +/- 5.5° | +/- 6.5° | +/- 6.5° |
Weight | |
|
|
|
|
|
|
Optimum Hydraulic Flow | |
to |
|
|
|
|
|
Optimum Hydraulic Pressure | |
|
|
|
|
|
|
Cold Planers are designed for small paving jobs performed typically on hard, compact materials such as asphalt and concrete in residential and commercial applications. Cold planers are ideal for milling bumps or imperfections in expanded pavements prior to resurfacing, removing cracked or deteriorated pavement, removing traffic lane stripes, and jobs where weight restrictions limit the use of dedicated planers.
Caterpillar Information System:
574B Forwarder Grapple Damper Brake - Inspect/Adjust
574B Forwarder Grapple Damper - Lubricate
574B Forwarder Fuel System Primary Filter - Replace
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Caterpillar Approved Machines
574B Forwarder Fuel System - Prime
574B Forwarder Final Drive Oil Sample - Obtain
574B Forwarder Engine Oil Sample - Obtain
574B Forwarder Differential Oil Sample - Obtain
574B Forwarder Cooling System Sample - Obtain
574B Forwarder Bogie Oil Sample - Obtain
3054E Industrial Engine Voltage Load Protection Module - Remove and Install
3056E Industrial Engine Valve Guide - Inspect
574B Forwarder Hydraulic System Oil Sample - Obtain
574B Forwarder Transmission Gearbox Oil Sample - Obtain
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Plate Locations and Film Locations
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Daily Inspection
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Work Tool Installation and Removal
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Operation
2002/12/23 Washer Pump Assemblies Must Be Primed Properly {7306}
2003/01/20 Kits are Available for Servicing 105-4324 Air Starting Motor Gp {1451}
R1300G Load Haul Dump Hydraulic System Main Hydraulic System
R1300G Load Haul Dump Hydraulic System Main Control Valve
R1300G Load Haul Dump Hydraulic System Relief Valve (Lift Circuit)
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Shutoff Valve (Axle Lock) - Remove and Install