Grapple Damper - Lubricate
Show/hide table
 | |
| Illustration 1 | g00892056 |
Damper Assembly | |
- There are three grease fittings that are located on the grapple damper. Lubricate the fittings with 5P-0960 Molybdenum Grease .
- Inspect the lower damper bushing. If the play exceeds 1.5 mm (.06 inch) contact your Caterpillar dealer for service.
Show/hide table
 | |
| Illustration 2 | g00892174 |
Caterpillar Information System:
574B Forwarder Fuel System Primary Filter - Replace
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Caterpillar Approved Machines
574B Forwarder Fuel System - Prime
574B Forwarder Final Drive Oil Sample - Obtain
574B Forwarder Engine Oil Sample - Obtain
574B Forwarder Differential Oil Sample - Obtain
574B Forwarder Cooling System Sample - Obtain
574B Forwarder Bogie Oil Sample - Obtain
3054E Industrial Engine Voltage Load Protection Module - Remove and Install
3056E Industrial Engine Valve Guide - Inspect
3176C and 3406E Engines for Caterpillar Built Machines Fuel Level Sensor Circuit - Test
2003/01/27 The Turbocharger Housing Must Have the Correct Orientation in Order to Prevent Cracks in the Oil Drain Tube {1052}
574B Forwarder Grapple Damper Brake - Inspect/Adjust
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Specifications
574B Forwarder Hydraulic System Oil Sample - Obtain
574B Forwarder Transmission Gearbox Oil Sample - Obtain
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Plate Locations and Film Locations
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Daily Inspection
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Work Tool Installation and Removal
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Operation
2002/12/23 Washer Pump Assemblies Must Be Primed Properly {7306}
2003/01/20 Kits are Available for Servicing 105-4324 Air Starting Motor Gp {1451}
R1300G Load Haul Dump Hydraulic System Main Hydraulic System
R1300G Load Haul Dump Hydraulic System Main Control Valve