Screed Plate Leveling
- Check the plates for flatness with a stringline or a straight edge. Add shims or remove shims across the bull nose of the screed. Add shims or remove shims across the leading edge of the main screed plate.
- Check the front of the rear alignment of the extender plates with the main screed. With the rear edge of the extender plate level with the main screed plate, the front edge of the extender plate should have a 3.175 mm (0.125 inch) gap between the plate and the straight edge. Perform the check 102 mm (4 inch) from the outside edge of the screed plate. Check five points across the entire screed with a level that is 1.2 m (4 ft) long.
- Use the screw adjusters in order to level the rear edge of the screed plate. Turn the screw adjusters clockwise for 1/6 of a turn in order to adjust the screed plate 0.3556 mm (0.014 inch).
To lower the plate, turn the adjuster screw clockwise. To raise the plate, turn the adjuster screw counterclockwise.
- Repeat Step 3.
Caterpillar Information System:
8-16B Extend-A-Mat Screed Adjustments While Paving
TH210 and TH215 Telehandlers Longitudinal Stability Indicator
TH210 and TH215 Telehandlers Lockout Control
TH210 and TH215 Telehandlers Steering Mode Control
TH210 and TH215 Telehandlers Steering Control
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System Transmission Fill - Calibrate - Using the Caterpillar Monitoring System
PF-300B and PS-300B Pneumatic Compactors Cab Tilting
2001/06/25 Correction to Parts Manual for Harvester Heads {5051}
TK1051 Track Feller BuncherEngine Supplement Refrigerant Condenser - Remove and Install
TK1051 Track Feller Buncher Machine Systems Stick - Remove
CP-433E, CS-423E and CS-433E Vibratory Compactors Engine Supplement Battery - Remove and Install
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train Differential and Bevel Gear
2001/07/02 Special Instruction, REHS0986, "Procedure for the Removal of Bolts That Are Used for Shipping on Differentials" is Now Available {3258}
CP-433E, CS-423E and CS-433E Vibratory Compactors Engine Supplement Electric Starting Motor - Remove and Install
TK1051 Track Feller BuncherEngine Supplement Preparation for Disassembly
8-16B Extend-A-Mat Screed Operating Principles
3176C and 3196 Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System Steering Control Valve - Adjust
PM-465 Cold Planer Steering Control
2002/03/25 New Slack Adjusters are Used for Improved Service Life {0731, 4261}
2001/07/02 Revised Special Instruction, REHS0924-02 , "Installation Procedure for Side Window Wipers on Forwarders" is Available {7305}
735 Articulated Truck Power Train Front Axle
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Signal and Pressure Reducing Valve (Steering)
735 Articulated Truck Power Train Center Axle