Electric Starting Motor - Remove and Install
Removal Procedure
- Open the engine enclosure.
- Turn the battery disconnect switch to the OFF position.
- Disconnect two electrical wires (3) from starter (1) .
Show/hide table
Illustration 1 | g00807247 |
- Remove three bolts (2) and starter (1) from the machine.
Installation Procedure
- Install starter (1), the clip, and three bolts (2) .
Show/hide table
Illustration 2 | g00807247 |
- Connect two electrical wires (3) on starter (1) .
Caterpillar Information System:
2001/07/02 Special Instruction, REHS0986, "Procedure for the Removal of Bolts That Are Used for Shipping on Differentials" is Now Available {3258}
8-16B Extend-A-Mat Screed Screed Plate Leveling
8-16B Extend-A-Mat Screed Adjustments While Paving
TH210 and TH215 Telehandlers Longitudinal Stability Indicator
TH210 and TH215 Telehandlers Lockout Control
TH210 and TH215 Telehandlers Steering Mode Control
TH210 and TH215 Telehandlers Steering Control
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System Transmission Fill - Calibrate - Using the Caterpillar Monitoring System
PF-300B and PS-300B Pneumatic Compactors Cab Tilting
2001/06/25 Correction to Parts Manual for Harvester Heads {5051}
TK1051 Track Feller BuncherEngine Supplement Refrigerant Condenser - Remove and Install
TK1051 Track Feller Buncher Machine Systems Stick - Remove
TK1051 Track Feller BuncherEngine Supplement Preparation for Disassembly
8-16B Extend-A-Mat Screed Operating Principles
3176C and 3196 Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System Steering Control Valve - Adjust
PM-465 Cold Planer Steering Control
2002/03/25 New Slack Adjusters are Used for Improved Service Life {0731, 4261}
2001/07/02 Revised Special Instruction, REHS0924-02 , "Installation Procedure for Side Window Wipers on Forwarders" is Available {7305}
735 Articulated Truck Power Train Front Axle
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Signal and Pressure Reducing Valve (Steering)
735 Articulated Truck Power Train Center Axle
Conversion of the Joystick from Fork Control to Bucket Control{5063, 5705, 6107} Conversion of the Joystick from Fork Control to Bucket Control{5063, 5705, 6107}
2001/07/02 Special Instruction, REHS0977, "Rework Extends Service Life of the Axle" is Available {3278}