Front Axle
Show/hide table
 | |
| Illustration 1 | g00807416 |
(1) Use 1U-8846 Gasket Sealant in order to form the seal at the flange.
(2) Tighten 28 bolts to a torque of 125 ± 25 N·m (90 ± 18 lb ft) in an alternating star pattern. Tighten the bolts again. Final tightening torque for the bolts 270 ± 25 N·m (200 ± 19 lb ft)
(3) Tighten 52 bolts to a torque of 430 ± 60 N·m (320 ± 45 lb ft) in an alternating star pattern.
Caterpillar Information System:
2001/07/02 Revised Special Instruction, REHS0924-02 , "Installation Procedure for Side Window Wipers on Forwarders" is Available {7305}
2002/03/25 New Slack Adjusters are Used for Improved Service Life {0731, 4261}
PM-465 Cold Planer Steering Control
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System Steering Control Valve - Adjust
3176C and 3196 Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
8-16B Extend-A-Mat Screed Operating Principles
TK1051 Track Feller BuncherEngine Supplement Preparation for Disassembly
CP-433E, CS-423E and CS-433E Vibratory Compactors Engine Supplement Electric Starting Motor - Remove and Install
2001/07/02 Special Instruction, REHS0986, "Procedure for the Removal of Bolts That Are Used for Shipping on Differentials" is Now Available {3258}
8-16B Extend-A-Mat Screed Screed Plate Leveling
8-16B Extend-A-Mat Screed Adjustments While Paving
TH210 and TH215 Telehandlers Longitudinal Stability Indicator
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Signal and Pressure Reducing Valve (Steering)
735 Articulated Truck Power Train Center Axle
Conversion of the Joystick from Fork Control to Bucket Control{5063, 5705, 6107} Conversion of the Joystick from Fork Control to Bucket Control{5063, 5705, 6107}
2001/07/02 Special Instruction, REHS0977, "Rework Extends Service Life of the Axle" is Available {3278}
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Hydraulic Cylinder Drift - Check
2001/08/13 An Improved Unit Injector Hydraulic Pump is Available {1714}
PF-300B and PS-300B Pneumatic Compactors Final Drive Reducer Oil Level - Check
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train Pinout Specifications for Electronic Control (Power Train)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Pressure and Flow Compensator Valve
PF-300B and PS-300B Pneumatic Compactors Final Drive Reducer Oil - Change
735 Articulated Truck Power Train Rear Axle
TK1051 Track Feller Buncher Machine Systems Stick - Install