Battery - Remove and Install
Removal Procedure
- Open the engine enclosure.
- Turn the battery disconnect switch to the OFF position.
- Remove two bolts (1) and cover (2) .
Show/hide table
 | |
| Illustration 1 | g00807080 |
- Remove hold down assembly (3) from two batteries (5) .
Show/hide table
 | |
| Illustration 2 | g00807081 |
- Remove four battery cables (4) and remove two batteries (5) from the machine.
Installation Procedure
- Install two batteries (5) and four battery cables (4). The four battery cables must not rub on the frame.
Show/hide table
| | |
| Illustration 3 | g00807081 |
- Install hold down assembly (3) on two batteries (5) .
- Install cover (2) and two bolts (1) .
Show/hide table
| | |
| Illustration 4 | g00807080 |
Caterpillar Information System:
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train Differential and Bevel Gear
8-16B Extend-A-Mat Screed Thickness Control Screw Adjustment
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Machine Preparation for Troubleshooting
8-16B Extend-A-Mat Screed Auger Extension Installation
988G Wheel Loader Electrohydraulic System Visual Inspection
8-16B Extend-A-Mat Screed Extension Installation
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Refrigerant Accumulator - Remove and Install
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Refrigerant Condenser - Remove and Install
TH210 and TH215 Telehandlers Joystick Control
793B Off-Highway Truck Power Train Bypass Switch (Transmission Charging Filter)
PF-300B and PS-300B Pneumatic Compactors Parking Brake Manual Release
CP-433E, CS-423E and CS-433E Vibratory Compactors Engine Supplement Alternator - Remove and Install
TK1051 Track Feller Buncher Machine Systems Stick - Remove
TK1051 Track Feller BuncherEngine Supplement Refrigerant Condenser - Remove and Install
2001/06/25 Correction to Parts Manual for Harvester Heads {5051}
PF-300B and PS-300B Pneumatic Compactors Cab Tilting
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System Transmission Fill - Calibrate - Using the Caterpillar Monitoring System
TH210 and TH215 Telehandlers Steering Control
TH210 and TH215 Telehandlers Steering Mode Control
TH210 and TH215 Telehandlers Lockout Control
TH210 and TH215 Telehandlers Longitudinal Stability Indicator
8-16B Extend-A-Mat Screed Adjustments While Paving
8-16B Extend-A-Mat Screed Screed Plate Leveling
2001/07/02 Special Instruction, REHS0986, "Procedure for the Removal of Bolts That Are Used for Shipping on Differentials" is Now Available {3258}