Flow Control Valve (Vibratory) - Assemble
Assembly Procedure
- Inspect all parts and clean all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
- Inspect all seals. Damaged seals must be replaced. Use new Caterpillar seals for replacement.
- Install O-ring seal (13), O-ring seal (12), backup ring (11), backup ring (10), O-ring seal (9), and backup ring (8) on sensing valve (7) .
Show/hide table
 | |
| Illustration 1 | g00802140 |
- Install sensing valve (7) in valve housing (1) .
Show/hide table
 | |
| Illustration 2 | g00802121 |
- Install O-ring seal (6), backup ring (5), O-ring seal (4), and backup ring (3) on valve (2) .
Show/hide table
 | |
| Illustration 3 | g00802120 |
- Install valve (2) in valve housing (1) .
Show/hide table
 | |
| Illustration 4 | g00802119 |
End By: Install the flow control valve (vibratory). Refer to Disassembly and Assembly, "Flow Control Valve (Vibratory) - Install".
Caterpillar Information System:
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
570B and 580B Wheel Harvesters Power Train Solenoid Valve - Remove and Install - Control Valve (All Wheel Drive), Neutralizer Valve, Speed Control Valve, Differential Lock Control Valve, Rear Brake Valve, and Front Brake Valve
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 1484 - FMI 03
561M Pipelayer Hook Sheave Block (Upper) - Disassemble
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0444 - FMI 06
143H and 163H Motor Graders All Wheel Drive Diagnostic Capabilities
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0444 - FMI 05
AS2301 Screed Flow Control Valve (Vibratory) - Disassemble
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0444 - FMI 03
322C Forest Machine Hydraulic System Swing Speed and Swing Drift on a Slope - Check
740 and 740 EJECTOR Articulated Trucks Power Train Final Drive and Wheel
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines CID 0175 FMI 04 Engine Oil Temperature short to ground
2001/06/11 Boost Pressure for Turbocharged 3054 Machine Engines {1052}
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear (Rear) - Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear (Rear) - Assemble
143H and 163H Motor Graders All Wheel Drive Features
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0701 - FMI 02
561M Pipelayer Hook Sheave Block (Upper) - Assemble
267, 277 and 287 Multi Terrain Loaders Machine Systems Idler Wheel
561M Pipelayer Hook Sheave Block (Lower) - Disassemble
3054E and 3056E Industrial Engines Air Compressor Filter - Clean/Replace - If Equipped
267, 277 and 287 Multi Terrain Loaders Machine Systems Undercarriage
PF-300B and PS-300B Pneumatic Compactors Propel Control
570B and 580B Wheel Harvesters Power Train Final Drive (Front Bogie) - Remove