Final Drive (Front Bogie) - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7574     | Link Bracket     | 2     |
Start By:
- Remove the wheel. Refer to Disassembly and Assembly, "Wheel - Remove and Install" for the machine that is being serviced.
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Drain the oil from the final drive.
Reference: Operation and Maintenance Manual, "Final Drive Oil - Change"
- Install Tooling (A) to final drive (1). Attach a hoist and a suitable lifting sling to Tooling (A), as shown.
Show/hide table
Illustration 1 | g00620955 |
- Remove bolts (2) from final drive (1) .
- Use the hoist to carefully remove final drive (1). The weight of the final drive is 110 kg (250 lb).
Caterpillar Information System:
PF-300B and PS-300B Pneumatic Compactors Propel Control
267, 277 and 287 Multi Terrain Loaders Machine Systems Undercarriage
3054E and 3056E Industrial Engines Air Compressor Filter - Clean/Replace - If Equipped
561M Pipelayer Hook Sheave Block (Lower) - Disassemble
267, 277 and 287 Multi Terrain Loaders Machine Systems Idler Wheel
561M Pipelayer Hook Sheave Block (Upper) - Assemble
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0701 - FMI 02
143H and 163H Motor Graders All Wheel Drive Features
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear (Rear) - Assemble
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear (Rear) - Install
2001/06/11 Boost Pressure for Turbocharged 3054 Machine Engines {1052}
AS2301 Screed Flow Control Valve (Vibratory) - Assemble
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Feed Roller Arm Cylinder Opening Speed - Test and Adjust
2001/07/16 Corrections to Operation and Maintenance Manual, KEBU6556-00, "Lubricant Viscosities" {1000, 7000, 7581}
PF-300B and PS-300B Pneumatic Compactors Service Brake Control
570B and 580B Wheel Harvesters Power Train Final Drive (Front Bogie) - Disassemble
570B and 580B Wheel Harvesters Power Train Final Drive (Front Bogie) - Assemble
561M Pipelayer Hook Sheave Block (Lower) - Assemble
570B and 580B Wheel Harvesters Power Train Final Drive (Front Bogie) - Install
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 1484 - FMI 04
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Parking Brake - Remove
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Axle Trunnion (Front and Rear) - Remove and Install
2001/06/18 Correction to Systems Operation, Testing and Adjusting , "Power Train Pressures" {3159, 3258}
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Refrigerant Accumulator - Remove and Install