Hook Sheave Block (Lower) - Disassemble
Disassembly Procedure
Start By:
- Remove the cable for the hook. Refer to Disassembly and Assembly, "Hook Winch Cable - Remove" for the correct procedure.
- Remove the cotter pin, full nut (2), and bolt (3). Remove pocket (1) .
Show/hide table
 | |
| Illustration 1 | g00802246 |
- Remove two nuts (5), two bolts (7), and hook assembly (4) .
Show/hide table
 | |
| Illustration 2 | g00802255 |
- Remove two nuts (6), two bolts (9), and two spacers (8) .
- Remove pin assembly (9), side plate (10), sheave assembly (11), and side plate (10) .
Show/hide table
 | |
| Illustration 3 | g00802270 |
- Remove bushing (12) from sheave assembly (11) .
Show/hide table
 | |
| Illustration 4 | g00802313 |
Caterpillar Information System:
267, 277 and 287 Multi Terrain Loaders Machine Systems Idler Wheel
561M Pipelayer Hook Sheave Block (Upper) - Assemble
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0701 - FMI 02
143H and 163H Motor Graders All Wheel Drive Features
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear (Rear) - Assemble
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear (Rear) - Install
2001/06/11 Boost Pressure for Turbocharged 3054 Machine Engines {1052}
AS2301 Screed Flow Control Valve (Vibratory) - Assemble
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
570B and 580B Wheel Harvesters Power Train Solenoid Valve - Remove and Install - Control Valve (All Wheel Drive), Neutralizer Valve, Speed Control Valve, Differential Lock Control Valve, Rear Brake Valve, and Front Brake Valve
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 1484 - FMI 03
561M Pipelayer Hook Sheave Block (Upper) - Disassemble
3054E and 3056E Industrial Engines Air Compressor Filter - Clean/Replace - If Equipped
267, 277 and 287 Multi Terrain Loaders Machine Systems Undercarriage
PF-300B and PS-300B Pneumatic Compactors Propel Control
570B and 580B Wheel Harvesters Power Train Final Drive (Front Bogie) - Remove
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Feed Roller Arm Cylinder Opening Speed - Test and Adjust
2001/07/16 Corrections to Operation and Maintenance Manual, KEBU6556-00, "Lubricant Viscosities" {1000, 7000, 7581}
PF-300B and PS-300B Pneumatic Compactors Service Brake Control
570B and 580B Wheel Harvesters Power Train Final Drive (Front Bogie) - Disassemble
570B and 580B Wheel Harvesters Power Train Final Drive (Front Bogie) - Assemble
561M Pipelayer Hook Sheave Block (Lower) - Assemble
570B and 580B Wheel Harvesters Power Train Final Drive (Front Bogie) - Install
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 1484 - FMI 04