Hook Sheave Block (Upper) - Disassemble
Disassembly Procedure
Start By:
- Remove the upper hook sheave block. Refer to Disassembly and Assembly, "Hook Sheave Block (Upper) - Remove" for the correct procedure.
- Remove the cotter pin, pin (1), and pin (2). Remove trunnion (3) .
Show/hide table
Illustration 1 | g00802142 |
- Remove nut (1), bolt (2), and spacers (3) .
Show/hide table
Illustration 2 | g00802143 |
- Remove two nuts (4), two bolts (5), and two hanger arms (6) .
- Remove nut (10), side plate (7), sheave assembly (9), center plate (8), and sheave assembly (9). Remove nut (12) and pin (11) from sideplate (7) .
Show/hide table
Illustration 3 | g00802144 |
- Remove bushing (13) from sheave assembly (9). Repeat for the other sheave assembly.
Show/hide table
Illustration 4 | g00802177 |
Caterpillar Information System:
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0444 - FMI 06
143H and 163H Motor Graders All Wheel Drive Diagnostic Capabilities
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0444 - FMI 05
AS2301 Screed Flow Control Valve (Vibratory) - Disassemble
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0444 - FMI 03
322C Forest Machine Hydraulic System Swing Speed and Swing Drift on a Slope - Check
740 and 740 EJECTOR Articulated Trucks Power Train Final Drive and Wheel
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
AS2301 Screed Vibratory Group - Assemble
2001/09/04 Hardened Full Length Moldboard Rails Are Available for Parts Service {6151}
8-16B Extend-A-Mat Screed Before Receiving the First Load of Asphalt
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 1484 - FMI 03
570B and 580B Wheel Harvesters Power Train Solenoid Valve - Remove and Install - Control Valve (All Wheel Drive), Neutralizer Valve, Speed Control Valve, Differential Lock Control Valve, Rear Brake Valve, and Front Brake Valve
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
AS2301 Screed Flow Control Valve (Vibratory) - Assemble
2001/06/11 Boost Pressure for Turbocharged 3054 Machine Engines {1052}
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear (Rear) - Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear (Rear) - Assemble
143H and 163H Motor Graders All Wheel Drive Features
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0701 - FMI 02
561M Pipelayer Hook Sheave Block (Upper) - Assemble
267, 277 and 287 Multi Terrain Loaders Machine Systems Idler Wheel
561M Pipelayer Hook Sheave Block (Lower) - Disassemble