Flow Control Valve (Vibratory) - Disassemble
Disassembly Procedure
Start By:
- Remove the flow control valve (vibratory). Refer to Disassembly and Assembly, "Flow Control Valve (Vibratory) - Remove".
- Remove valve (2) from valve housing (1) .
Show/hide table
 | |
| Illustration 1 | g00802119 |
- Remove backup ring (3), O-ring seal (4), backup ring (5), and O-ring seal (6) from valve (2) .
Show/hide table
 | |
| Illustration 2 | g00802120 |
- Remove sensing valve (7) from valve housing (1) .
Show/hide table
 | |
| Illustration 3 | g00802121 |
- Remove backup ring (8), O-ring seal (9), backup ring (10), backup ring (11), O-ring seal (12), and O-ring seal (13) from sensing valve (7) .
Show/hide table
 | |
| Illustration 4 | g00802140 |
Caterpillar Information System:
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0444 - FMI 03
322C Forest Machine Hydraulic System Swing Speed and Swing Drift on a Slope - Check
740 and 740 EJECTOR Articulated Trucks Power Train Final Drive and Wheel
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
AS2301 Screed Vibratory Group - Assemble
2001/09/04 Hardened Full Length Moldboard Rails Are Available for Parts Service {6151}
8-16B Extend-A-Mat Screed Before Receiving the First Load of Asphalt
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0700 - FMI 02
143H and 163H Motor Graders All Wheel Drive Electronic Control Module (ECM) - Replace
Assembly Procedure for the Mine Specific Design II Truck Body for the 797 and 797B Off-Highway Truck{7000, 7258} Assembly Procedure for the Mine Specific Design II Truck Body for the 797 and 797B Off-Highway Truck{7000, 7258}
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Gear Pump (Aftercooler) - Disassemble
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0444 - FMI 05
143H and 163H Motor Graders All Wheel Drive Diagnostic Capabilities
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0444 - FMI 06
561M Pipelayer Hook Sheave Block (Upper) - Disassemble
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 1484 - FMI 03
570B and 580B Wheel Harvesters Power Train Solenoid Valve - Remove and Install - Control Valve (All Wheel Drive), Neutralizer Valve, Speed Control Valve, Differential Lock Control Valve, Rear Brake Valve, and Front Brake Valve
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
AS2301 Screed Flow Control Valve (Vibratory) - Assemble
2001/06/11 Boost Pressure for Turbocharged 3054 Machine Engines {1052}
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear (Rear) - Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear (Rear) - Assemble
143H and 163H Motor Graders All Wheel Drive Features