Idler Wheel
236-5095 Idler Wheel
Show/hide table
 | |
| Illustration 1 | g00802228 |
(1) Torque for the 24 1K-6872 Locknuts ... 95 ± 10 N·m (70 ± 7 lb ft)
The 1K-6872 Locknuts will need to be replaced after removal.
(2) Apply 5P-3413 Thread Sealant to the threads of the 108-2187 Plug before installation.
222-5685 Idler Wheel
Show/hide table
| | |
| Illustration 2 | g00802228 |
(1) Torque for the 24 1K-6872 Locknuts ... 95 ± 10 N·m (70 ± 7 lb ft)
The 1K-6872 Locknuts will need to be replaced after removal.
(2) Apply 5P-3413 Thread Sealant to the threads of the 108-2187 Plug before installation.
Caterpillar Information System:
561M Pipelayer Hook Sheave Block (Upper) - Assemble
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0701 - FMI 02
143H and 163H Motor Graders All Wheel Drive Features
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear (Rear) - Assemble
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear (Rear) - Install
2001/06/11 Boost Pressure for Turbocharged 3054 Machine Engines {1052}
AS2301 Screed Flow Control Valve (Vibratory) - Assemble
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
570B and 580B Wheel Harvesters Power Train Solenoid Valve - Remove and Install - Control Valve (All Wheel Drive), Neutralizer Valve, Speed Control Valve, Differential Lock Control Valve, Rear Brake Valve, and Front Brake Valve
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 1484 - FMI 03
561M Pipelayer Hook Sheave Block (Upper) - Disassemble
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0444 - FMI 06
561M Pipelayer Hook Sheave Block (Lower) - Disassemble
3054E and 3056E Industrial Engines Air Compressor Filter - Clean/Replace - If Equipped
267, 277 and 287 Multi Terrain Loaders Machine Systems Undercarriage
PF-300B and PS-300B Pneumatic Compactors Propel Control
570B and 580B Wheel Harvesters Power Train Final Drive (Front Bogie) - Remove
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Feed Roller Arm Cylinder Opening Speed - Test and Adjust
2001/07/16 Corrections to Operation and Maintenance Manual, KEBU6556-00, "Lubricant Viscosities" {1000, 7000, 7581}
PF-300B and PS-300B Pneumatic Compactors Service Brake Control
570B and 580B Wheel Harvesters Power Train Final Drive (Front Bogie) - Disassemble
570B and 580B Wheel Harvesters Power Train Final Drive (Front Bogie) - Assemble
561M Pipelayer Hook Sheave Block (Lower) - Assemble
570B and 580B Wheel Harvesters Power Train Final Drive (Front Bogie) - Install