Stabilizer and Cylinder Bearings - Lubricate
Show/hide table
Illustration 1 | g00712945 |
Lubrication Points for the Inner Bearings of the Stabilizer Cylinders |
Show/hide table
Illustration 2 | g00712956 |
Lubrication Point for the Outer Bearing of the Stabilizer Cylinder |
Show/hide table
Illustration 3 | g00712961 |
Lubrication Point for the Pivot Pin Assembly of the Stabilizer Leg |
If equipped, lubricate the stabilizer cylinder bearings and the legs of the stabilizer through six fittings.
Caterpillar Information System:
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Oscillating Axle (Rear) and Trunnion Support - Install
2000/05/22 A New Speed Sensor has Improved Service Life {3141, 3175}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>4P-2236</B> Generator through <B>4P-9907</B> Generator
120H and 135H Motor Graders Parking
143H and 163H Motor Graders Operation
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Differential - Disassemble
2000/06/05 New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
AP-1050B and BG-245C Asphalt Pavers Parking
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System Solenoid Valve (Blade Lift, Lower, Tip, and Tilt) - Calibrate
143H and 163H Motor Graders Before Operation
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Axle Housing - Disassemble
TH62, TH63, TH82 and TH83 Telehandlers Service Brake - Adjust
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Muffler - Remove and Install
2000/06/05 A New Harness Is Available for Brooms {1408}
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Fan Guard - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Transfer Gear Oil - Change
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Oscillating Axle (Rear) and Trunnion Support - Remove
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for MT735, MT745, MT755, MT765, MTC735, MTC745, MTC755, and MTC765 Agricultural Tractors CID 0100 FMI 13 Engine Oil Pressure calibration required
2000/06/12 Improved Routing of the Wire for the Suspension Seat {7324}
TH62, TH63, TH82 and TH83 Telehandlers Transfer Gear Oil Level - Check
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Oil Cooler (Brake) - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic Drive - Assemble