A New Harness Is Available for Brooms {1408}
- Backhoe Loader:
- 416C (PIN: 4ZN; 5YN; 1WR; 1XR)
- 426C (PIN: 1CR; 1ER; 1MR; 1NR; 1YR; 1ZR; 6XN; 7WN)
- 428C (PIN: 8RN; 2CR)
- 436C (PIN: 1FR; 1GR; 1PR; 1RR; 2AR; 2BR; 8TN; 9JN)
- 438C (PIN: 1JR; 1TR; 2DR; 9KN)
The 139-6173 Broom Wiring Group is now compatible to all BA25 Brooms with eight or six pin connectors. The 174-3048 Harness replaced the 139-6174 Harness. The 174-3048 Harness has three ends. One end of the harness will not be connected. See Table 1 for the additional changes to the 139-6173 Broom Wiring Group.
Show/hide table
Required Parts     | |||
Item     | Qty     | Part Number     | Description     |
1     | 1     | 165-9074     | Switch     |
2     | 1     | 174-3048     | Harness     |
3     | 1     | 171-7159     | Bracket     |
4     | 2     | 8T-4136     | Bolt     |
5     | 2     | 8T-4121     | Hard Washer     |
6     | 2     | 8T-0389     | Locknut     |
7     | 2     | 3S-2093     | Cable Strap     |
8     | 2     | 132-5789     | Clip     |
9     | 1     | 159-9495     | Nut     |
10     | 1     | 159-9496     | Lockwasher     |
Show/hide table
Illustration 1 | g00712377 |
See Table 1. |
Show/hide table
Illustration 2 | g00712788 |
Install the switch on the right side panel. |
Caterpillar Information System:
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Muffler - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Service Brake - Adjust
TH103 Telehandler Stabilizer and Cylinder Bearings - Lubricate
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Oscillating Axle (Rear) and Trunnion Support - Install
2000/05/22 A New Speed Sensor has Improved Service Life {3141, 3175}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>4P-2236</B> Generator through <B>4P-9907</B> Generator
120H and 135H Motor Graders Parking
143H and 163H Motor Graders Operation
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Differential - Disassemble
2000/06/05 New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
AP-1050B and BG-245C Asphalt Pavers Parking
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Fan Guard - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Transfer Gear Oil - Change
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Oscillating Axle (Rear) and Trunnion Support - Remove
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for MT735, MT745, MT755, MT765, MTC735, MTC745, MTC755, and MTC765 Agricultural Tractors CID 0100 FMI 13 Engine Oil Pressure calibration required
2000/06/12 Improved Routing of the Wire for the Suspension Seat {7324}
TH62, TH63, TH82 and TH83 Telehandlers Transfer Gear Oil Level - Check
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Oil Cooler (Brake) - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic Drive - Assemble
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0172 FMI 04 Intake Manifold Air Temp short to ground
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic Drive - Disassemble