Parking
將機器停放在水平表面上。 如果必須停駐在斜坡上，請用適合的擋塊阻擋機器的輪子。 考慮以下項目：
- 輪胎尺寸
- 機器重量
- 地面情況
啟用行車煞車以停止機器。 將變速箱控制裝置 (操縱桿) 移至 NEUTRAL (空檔) 位置。 將油門控制裝置切換至 LOW IDLE (低怠速) 位置。
啟用駐車煞車。
將所有設備降至地面。 啟動所有控制鎖。
關閉引擎。
將引擎起動開關調至 OFF (關閉) 位置，並取下引擎起動開關鑰匙。
將蓄電池斷路開關切換至 OFF (關閉) 位置。 如果長時間不操作機器，請取下斷路開關鑰匙。 這樣做可以防止蓄電池放電。 電池短路、來自某些元件的任何電流消耗以及蓄意破壞行為都有可能造成蓄電池放電。
Caterpillar Information System:
143H and 163H Motor Graders Operation
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Differential - Disassemble
2000/06/05 New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
AP-1050B and BG-245C Asphalt Pavers Parking
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System Solenoid Valve (Blade Lift, Lower, Tip, and Tilt) - Calibrate
143H and 163H Motor Graders Before Operation
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Axle Housing - Disassemble
Topcon® System Five Operation
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Oil Pan - Install
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Dryer (Refrigerant) - Remove and Install
IT28G Integrated Toolcarrier and 928G Wheel Loader Steering System Pressure and Flow Compensator Valve (Steering)
CS-531D, CP-533D and CS-533D Vibratory Compactors Vibratory System Piston Pump
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>4P-2236</B> Generator through <B>4P-9907</B> Generator
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
2000/05/22 A New Speed Sensor has Improved Service Life {3141, 3175}
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Oscillating Axle (Rear) and Trunnion Support - Install
TH103 Telehandler Stabilizer and Cylinder Bearings - Lubricate
TH62, TH63, TH82 and TH83 Telehandlers Service Brake - Adjust
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Muffler - Remove and Install
2000/06/05 A New Harness Is Available for Brooms {1408}
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Fan Guard - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Transfer Gear Oil - Change
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Oscillating Axle (Rear) and Trunnion Support - Remove
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0100 FMI 04 Engine Oil Pressure short to ground