New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
- Backhoe Loader:
- 416B (PIN: 8SG; 6ZK)
- 426B (PIN: 5YJ; 6KL)
- 428B (PIN: 7EJ)
- 436B (PIN: 6MJ; 7FL)
- 438B (PIN: 3KK)
- 416C (PIN: 4ZN; 5YN; 1WR; 1XR)
- 426C (PIN: 1CR; 1ER; 1MR; 1NR; 1YR; 1ZR; 6XN; 7WN)
- 428C (PIN: 8RN; 2CR)
- 436C (PIN: 1FR; 1GR; 1RR; 2AR; 2BR; 8TN; 9JN; 1PR)
- 438C (PIN: 9KN; 1JR; 2DR; 1TR)
While the machine is operating, the hydraulic oil expands due to temperature. The oil pressure in the stabilizer cylinder rod end increases. The cylinder head may loosen due to the pressure. The new lock valves feature thermal relief in order to reduce this problem in the 106-6249 Stabilizer Lines. See Table 1 for the changes. See Table 3.
Connect the smaller port size of the lock valve to the hose on the stabilizer cylinder rod end.
Show/hide table
Required Parts for Lock Valves in the Stabilizers     | ||||
Item     | Qty     | Part Number     | Description     | Former Part Number     |
1     | 2     | 159-7569     | Check Valve     | 135-0565     |
2     | 2     | 7E-9898     | Orifice Connector     | 6V-8639     |
3     | 2     | 3J-1907     | Seal Connector     | 3K-0360     |
4     | 2     | 6V-8397     | O-Ring Seal     | 6V-8398     |
5     | 2     | 173-2492     | Hose Assembly (1)     | 135-8274     |
Show/hide table
( 1 ) | See Table 2 for the serviceable parts. |
Show/hide table
Serviceable Parts of the 173-2492 Hose Assembly     | ||
Qty     | Part Number     | Description     |
84 cm (33.1 inch)     |
122-6889     | Hydraulic Hose     |
1     | 124-2144     | Permanent Coupling     |
1     | 124-2116     | Permanent Coupling     |
Show/hide table
Manufacturing Effectivity of the 159-7569 Check Valve     | |
Model     | Product Identification Number     |
416C     | 4ZN18224     |
1WR9154 | |
426C     | 6XN4078     |
1CR874 | |
1MR968 | |
1YR1734 | |
436C     | 8TN985     |
1FR1416 | |
1PR1610 | |
2AR1645 |
Show/hide table
Illustration 1 | g00712114 |
The lock valves on stabilizer cylinder |
Caterpillar Information System:
AP-1050B and BG-245C Asphalt Pavers Parking
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System Solenoid Valve (Blade Lift, Lower, Tip, and Tilt) - Calibrate
143H and 163H Motor Graders Before Operation
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Axle Housing - Disassemble
Topcon® System Five Operation
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Oil Pan - Install
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Dryer (Refrigerant) - Remove and Install
IT28G Integrated Toolcarrier and 928G Wheel Loader Steering System Pressure and Flow Compensator Valve (Steering)
CS-531D, CP-533D and CS-533D Vibratory Compactors Vibratory System Piston Pump
AP-1050B and BG-245C Asphalt Pavers Safety Messages
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0253 FMI 02 Personality Module mismatch
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0254 FMI 12 Electronic Control Module Error
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Differential - Disassemble
143H and 163H Motor Graders Operation
120H and 135H Motor Graders Parking
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>4P-2236</B> Generator through <B>4P-9907</B> Generator
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
2000/05/22 A New Speed Sensor has Improved Service Life {3141, 3175}
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Oscillating Axle (Rear) and Trunnion Support - Install
TH103 Telehandler Stabilizer and Cylinder Bearings - Lubricate
TH62, TH63, TH82 and TH83 Telehandlers Service Brake - Adjust
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Muffler - Remove and Install
2000/06/05 A New Harness Is Available for Brooms {1408}
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Fan Guard - Remove and Install