143H and 163H Motor Graders Caterpillar


Before Operation

Usage:

143H 1AL
Amankan semua personil dari alat berat dan dari areanya..

Singkirkan semua penghalang dari jalur yang akan dilewati alat berat. Hati-hati akan bahaya seperti kabel listrik, parit, dsb.

Pastikan bahwa semua jendela dalam keadaan bersih. Amankan pintu dalam posisi terbuka atau dalam posisi tertutup. Amankan jendela dalam posisi terbuka atau dalam posisi tertutup.

Untuk mendapatkan sudut pandang yang terbaik terhadap daerah di sekitar alat berat, lakukan penyetelan pada kaca spion (jika dilengkapi).

Pastikan bahwa klakson alat berat, alarm mundur (jika dilengkapi) dan semua alat-alat peringatan bekerja dengan baik.

Kencangkan sabuk tempat duduk secara aman.

Caterpillar Information System:

IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Axle Housing - Disassemble
Topcon® System Five Operation
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Oil Pan - Install
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Dryer (Refrigerant) - Remove and Install
IT28G Integrated Toolcarrier and 928G Wheel Loader Steering System Pressure and Flow Compensator Valve (Steering)
CS-531D, CP-533D and CS-533D Vibratory Compactors Vibratory System Piston Pump
AP-1050B and BG-245C Asphalt Pavers Safety Messages
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0253 FMI 02 Personality Module mismatch
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0254 FMI 12 Electronic Control Module Error
2000/06/12 New Parts for the Controls of the Individual Clutch Modulation (ICM) are Available {3083}
3408E and 3412E Engines for Caterpillar Built Machines Engine Sensor Open/Short Circuit - Test
2000/05/22 New Sender Assembly for the Fuel Level has Improved Service Life {1273}
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System Solenoid Valve (Blade Lift, Lower, Tip, and Tilt) - Calibrate
AP-1050B and BG-245C Asphalt Pavers Parking
2000/06/05 New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Differential - Disassemble
143H and 163H Motor Graders Operation
120H and 135H Motor Graders Parking
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>4P-2236</B> Generator through <B>4P-9907</B> Generator
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
2000/05/22 A New Speed Sensor has Improved Service Life {3141, 3175}
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Oscillating Axle (Rear) and Trunnion Support - Install
TH103 Telehandler Stabilizer and Cylinder Bearings - Lubricate
TH62, TH63, TH82 and TH83 Telehandlers Service Brake - Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.