New Parts for the Controls of the Individual Clutch Modulation (ICM) are Available {3083}
- Underground Articulated Truck:
- AD40 (PIN: 1YZ)
- Off-Highway Truck/Tractor:
- 69C (PIN: 9SS)
- AE40 (PIN: 1ZZ)
- 69D (PIN: 9SS; 9XS1-UP)
- 73B (PIN: 1GW)
- 73D (PIN: 1GW)
Description of Change: A new detent cam and a new spring improve the service life of the controls for the ICM. The former spring may break in the shaft. A new rotary spool valve is required when the gear and the spring pins are replaced.
Adaptable To: The new parts are adaptable to the following models: 69C-101 & Up, 69D-101 & Up, 9XS1 & Up, 73B-101 & Up, 73D-101 & Up and AD/AE40-101 & Up.
Note: Use the following chart as a reference when new repair parts are ordered.
Show/hide table
| Conversion Table for the Spool Assemblies | |||
| Model Number | Valve Group | Former Spool Assembly | New Spool Assembly |
| 69C, 69D | 9U-9030 | 9U-9058 | 169-5461 |
| 73B, 73D | 3T-1512 | 3T-9511 | 176-7368 |
| AD/AE40 | 9U-8847 | 9U-8846 | 177-1880 |
Note: Use the following parts for all of the adaptable models: 162-5802 Detent Cam, 138-1645 Spring Pin and 8T-2925 Spring Pin.
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Engine Sensor Open/Short Circuit - Test
2000/05/22 New Sender Assembly for the Fuel Level has Improved Service Life {1273}
TH62, TH63, TH82 and TH83 Telehandlers Radiator Screen - Clean
TH62, TH63, TH82 and TH83 Telehandlers Radiator Core - Clean
CS-531D, CP-533D and CS-533D Vibratory Compactors Vibratory System General Information
2000/06/19 New Brackets are Needed When a New EMS Panel is Installed {7490}
IT28G Integrated Toolcarrier and 928G Wheel Loader Brake and Fan Drive System Brake Accumulator
TH62, TH63, TH82 and TH83 Telehandlers Quick Coupler - Lubricate
D400E Series II Ejector Truck Ejector Blade Cutting Edge - Check/Adjust
3034 Engine for Caterpillar Built Machines Turbocharger - Inspect
TH62, TH63, TH82 and TH83 Telehandlers Pulley for Boom Extension Chain - Lubricate
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Axle Housing - Assemble
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0254 FMI 12 Electronic Control Module Error
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0253 FMI 02 Personality Module mismatch
AP-1050B and BG-245C Asphalt Pavers Safety Messages
CS-531D, CP-533D and CS-533D Vibratory Compactors Vibratory System Piston Pump
IT28G Integrated Toolcarrier and 928G Wheel Loader Steering System Pressure and Flow Compensator Valve (Steering)
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Dryer (Refrigerant) - Remove and Install
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Oil Pan - Install
Topcon® System Five Operation
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Axle Housing - Disassemble
143H and 163H Motor Graders Before Operation
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System Solenoid Valve (Blade Lift, Lower, Tip, and Tilt) - Calibrate
AP-1050B and BG-245C Asphalt Pavers Parking