Alternator - Remove and Install
Removal Procedure
Show/hide table
Illustration 1 | g00555153 |
- Remove six bolts (2) from engine access panel (1) on the right side of the machine (lower panel). Remove the access panel.
- Put identification marks on two wires (5). Disconnect wires (5) from the alternator.
Show/hide table
Illustration 2 | g00555154 |
- Remove two clips (3) that hold the wires to the alternator.
- Loosen bolts (6) and move the alternator toward the engine.
- Remove two V-belts (7) from the alternator pulley.
- Remove bolts (6) and remove alternator (4) from the machine.
Installation Procedure
Show/hide table
Illustration 3 | g00555154 |
- Place alternator (4) in position and install bolts (6). Do not tighten the bolts.
- Position V-belts (7) over the alternator pulley.
- Move the alternator away from the engine in order to put tension on V-belts (7). Tighten bolts (6). Adjust the tension on the belts.
Note: Refer to the Operation and Maintenance Manual, SEBU7156, "Alternator Belts and Fan Belts - Inspect/Adjust/Replace" for the proper adjusting procedure.
- Connect wires (5) to the alternator. Install clips (3) that hold the wires to the alternator.
- Put engine access panel (1) in position and install bolts (2) .
Show/hide table
Illustration 4 | g00555153 |
Caterpillar Information System:
517 Track-Type Skidder Engine Supplement Air Cleaner - Remove and Install
Caterpillar Monitoring System Charge Pressure Display Mode
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Transmission Gear Indicator
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Engine Front Support - Remove
784C and 785C Off-Highway Trucks Machine Systems Cab - Install
3406E On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
Caterpillar Monitoring System Engine Oil Pressure Display Mode
527 Track-Type Skidder Power Train Testing and Adjusting
D250E Series II and D300E Series II Articulated Trucks Machine Systems Center Axle Stabilizer Rod - Remove and Install
3406E On-Highway Engine Coolant Temperature Sensor - Remove and Install
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinders
D7R Track-Type Tractor Engine Supplement Fan Drive - Assemble
517 Track-Type Skidder Engine Supplement Electric Starting Motor - Remove and Install
517 Track-Type Skidder Engine Supplement Engine and Torque Converter - Install
517 Track-Type Skidder Engine Supplement Engine and Torque Converter - Remove
517 Track-Type Skidder Engine Supplement Engine Oil Filter and Base - Remove
517 Track-Type Skidder Engine Supplement Engine Oil Filter Base - Assemble
517 Track-Type Skidder Engine Supplement Engine Oil Filter Base - Disassemble
517 Track-Type Skidder Engine Supplement Engine Oil Filter and Base - Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Service and Parking Brake (Rear)
517 Track-Type Skidder Engine Supplement Fan Drive - Disassemble
517 Track-Type Skidder Engine Supplement Fan Drive - Assemble
517 Track-Type Skidder Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
793C Off-Highway Truck/Tractor Power Train Lateral Control Rod (Rear Axle Housing) - Assemble