Coolant Temperature Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the level of the coolant below the coolant temperature sensor. Drain the coolant into a suitable container for storage or disposal.
- Disconnect the plug on wiring assembly (2) from the wiring harness.
- Remove coolant temperature sensor (1).
Show/hide table
| |
| Illustration 1 | g00518087 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install coolant temperature sensor (1). Tighten coolant temperature sensor (1) to a torque of
20 ± 3 N·m (15 ± 2 lb ft) . - Connect wire assembly (2) to the wiring harness.
- Fill the cooling system with coolant to the correct level. Refer to the Operation and Maintenance Manual for the correct procedure.
Show/hide table
|
| |
| Illustration 2 | g00518087 |
Caterpillar Information System:
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinders
D7R Track-Type Tractor Engine Supplement Fan Drive - Assemble
D7R Track-Type Tractor Engine Supplement Fan Drive - Disassemble
572R Pipelayer Engine Supplement Turbocharger - Remove and Install
572R Pipelayer Engine Supplement Air Cleaner - Remove and Install
572R Pipelayer Engine Supplement Precleaner - Remove and Install
793C and 793C XQ Off-Highway Trucks Hydraulic System General Information
784C and 785C Off-Highway Trucks Machine Systems Valve (Suspension Cylinder Charging) - Install
527 Track-Type Skidder Power Train Transmission Oil Pump
793C and 793C XQ Off-Highway Trucks Hydraulic System Position Sensor (Truck Body) - Adjust
793C and 793C XQ Off-Highway Trucks Hydraulic System Position Sensor (Dump Body)
773D Off-Highway Truck and 775D Quarry Truck Air System and Brakes Service and Parking Brake (Rear)
D250E Series II and D300E Series II Articulated Trucks Machine Systems Center Axle Stabilizer Rod - Remove and Install
527 Track-Type Skidder Power Train Testing and Adjusting
Caterpillar Monitoring System Engine Oil Pressure Display Mode
3406E On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Cab - Install
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Engine Front Support - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Transmission Gear Indicator
Caterpillar Monitoring System Charge Pressure Display Mode
517 Track-Type Skidder Engine Supplement Air Cleaner - Remove and Install
517 Track-Type Skidder Engine Supplement Alternator - Remove and Install
517 Track-Type Skidder Engine Supplement Electric Starting Motor - Remove and Install
517 Track-Type Skidder Engine Supplement Engine and Torque Converter - Install