Air Cleaner - Remove and Install
Removal Procedure
Start By:
- Remove the precleaner.
Reference: Refer to Disassembly and Assembly, "Precleaner - Remove and Install" in this module.
- Open the left side panel of the engine enclosure.
- Loosen two clamps (2). Remove air cleaner cover (1). Remove primary element (3) and secondary element (4) .
Show/hide table
Illustration 1 | g00584192 |
Show/hide table
Illustration 2 | g00584193 |
Show/hide table
Illustration 3 | g00584194 |
- Loosen two clamps (6). Remove hose (7) from air cleaner (5) .
Show/hide table
Illustration 4 | g00584196 |
- Remove five bolts (8) and the washers. Remove air cleaner (5) from the engine.
Show/hide table
Illustration 5 | g00584197 |
Installation Procedure
- Install air cleaner (5) on the engine. Install five bolts (8) and the washers in the original locations.
Show/hide table
Illustration 6 | g00584197 |
- Install hose (7) on air cleaner (5). Tighten two clamps (6) .
Show/hide table
Illustration 7 | g00584196 |
- Install secondary element (4) and primary element (3). Install air cleaner cover (1). Tighten two clamps (2) .
Show/hide table
Illustration 8 | g00584194 |
Show/hide table
Illustration 9 | g00584193 |
Show/hide table
Illustration 10 | g00584192 |
- Close the left side panel of the engine enclosure.
End By: Install the precleaner. Refer to Disassembly and Assembly, "Precleaner - Remove and Install" in this module.
Caterpillar Information System:
572R Pipelayer Engine Supplement Precleaner - Remove and Install
793C and 793C XQ Off-Highway Trucks Hydraulic System General Information
784C and 785C Off-Highway Trucks Machine Systems Valve (Suspension Cylinder Charging) - Install
527 Track-Type Skidder Power Train Transmission Oil Pump
793C and 793C XQ Off-Highway Trucks Hydraulic System Position Sensor (Truck Body) - Adjust
793C and 793C XQ Off-Highway Trucks Hydraulic System Position Sensor (Dump Body)
773D Off-Highway Truck and 775D Quarry Truck Air System and Brakes Service and Parking Brake (Rear)
Caterpillar Monitoring System Charging System Display Mode
527 Track-Type Skidder Power Train Final Drive
3406E and 3456 Generator Set Engines Fan Drive - Install
3406E On-Highway Engine Fan Drive - Remove
D250E Series II and D300E Series II Articulated Trucks Machine Systems Rear Axle Stabilizer Rod - Remove and Install
572R Pipelayer Engine Supplement Turbocharger - Remove and Install
D7R Track-Type Tractor Engine Supplement Fan Drive - Disassemble
D7R Track-Type Tractor Engine Supplement Fan Drive - Assemble
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinders
3406E On-Highway Engine Coolant Temperature Sensor - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Machine Systems Center Axle Stabilizer Rod - Remove and Install
527 Track-Type Skidder Power Train Testing and Adjusting
Caterpillar Monitoring System Engine Oil Pressure Display Mode
3406E On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Cab - Install
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Engine Front Support - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Transmission Gear Indicator