3406E and 3456 Generator Set Engines Caterpillar


Fan Drive - Install

Usage:

D8N 1XJ

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.





    Illustration 1g01029819

  1. Position fan drive (4) on the front housing.

  1. Install bolts (2) and nuts (3) loosely.

  1. Install bolt (1) .

    Note: Install belts (5) as a set only.

  1. Install the fan drive belts and adjust the belt tension. Refer to Specifications, "Belt Tension Chart".

  1. Tighten bolt (2) and nuts (3) that hold the fan drive in position.

Caterpillar Information System:

3406E On-Highway Engine Fan Drive - Remove
D250E Series II and D300E Series II Articulated Trucks Machine Systems Rear Axle Stabilizer Rod - Remove and Install
3406E On-Highway Engine Fan Drive - Assemble
980G Wheel Loader Power Train Trunnion Support (Oscillating Axle, Rear) - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0808 FMI 09 Interface Module (No. 8) Abnormal Update - Test
3304B and 3306B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0807 FMI 09 Interface Module (No. 7) Abnormal Update - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0806 FMI 09 Interface Module (No. 6) Abnormal Update - Test
784C and 785C Off-Highway Trucks Machine Systems Quad Gauge Module - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Electronic Control Module (Brake) - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0805 FMI 09 Interface Module (No. 5) Abnormal Update - Test
824G , 825G and 826G Landfill Compactor Compactor Wheel Tamping Tips - Inspect/Replace
527 Track-Type Skidder Power Train Final Drive
Caterpillar Monitoring System Charging System Display Mode
773D Off-Highway Truck and 775D Quarry Truck Air System and Brakes Service and Parking Brake (Rear)
793C and 793C XQ Off-Highway Trucks Hydraulic System Position Sensor (Dump Body)
793C and 793C XQ Off-Highway Trucks Hydraulic System Position Sensor (Truck Body) - Adjust
527 Track-Type Skidder Power Train Transmission Oil Pump
784C and 785C Off-Highway Trucks Machine Systems Valve (Suspension Cylinder Charging) - Install
793C and 793C XQ Off-Highway Trucks Hydraulic System General Information
572R Pipelayer Engine Supplement Precleaner - Remove and Install
572R Pipelayer Engine Supplement Air Cleaner - Remove and Install
572R Pipelayer Engine Supplement Turbocharger - Remove and Install
D7R Track-Type Tractor Engine Supplement Fan Drive - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.