Quad Gauge Module - Remove and Install
拆卸步骤
注: 为便于安装，在所有导线上做好标记。
注: 清洁度是一项重要的因素。 在执行拆卸操作之前，应彻底清洁部件外部。 这将有助于防止污垢进入内部机构。
- 将蓄电池断路开关转到关闭位置。
Show/hide table
 | |
| 图 1 | g00520611 |
- 卸下螺钉 (1) 。
- 将仪表盘 (2) 从前仪表板上分离。
- 从电子仪表组控制装置 (3) 上拆下指示灯 (4) 。
Show/hide table
 | |
| 图 2 | g00520934 |
- 从电子仪表组控制装置 (3) 上拆下指示灯 (5) 。
Show/hide table
 | |
| 图 3 | g00520958 |
- 从电子仪表组控制装置 (3) 上拆下线束组件 (6) 。
Show/hide table
 | |
| 图 4 | g01173092 |
- 卸下螺钉 (7) 和卡箍。
Show/hide table
 | |
| 图 5 | g00520965 |
- 卸下电缆扎带 (8) ，将线束组件放在一旁。
Show/hide table
 | |
| 图 6 | g00520966 |
- 卸下螺钉 (9) 。 从仪表盘 (2) 上卸下电子仪表组控制装置 (3) 。
Show/hide table
 | |
| 图 7 | g00520967 |
安装步骤
注: 清洁度是一项重要的因素。 在执行安装操作之前，应彻底清洁部件外部。 这将有助于防止污垢进入内部机构。
- 检查所有部件是否磨损，必要时更换部件。
- 将电子仪表组控制装置 (3) 安装到仪表盘 (2) 上。
Show/hide table
| | |
| 图 8 | g00520967 |
- 安装螺钉 (9) 。
- 使用电缆扎带 (8) 绑牢线束组件，如图所示。
Show/hide table
| | |
| 图 9 | g00520966 |
- 安装螺钉 (7) 和卡箍，如图所示。
Show/hide table
| | |
| 图 10 | g00520965 |
- 将线束组件 (6) 连接到电子仪表组控制装置 (3) 上。
Show/hide table
| | |
| 图 11 | g01173092 |
- 将指示灯 (5) 安装到电子仪表组控制装置 (3) 中。
Show/hide table
| | |
| 图 12 | g00520958 |
- 将指示灯 (4) 安装到电子仪表组控制装置 (3) 中。
Show/hide table
| | |
| 图 13 | g00520934 |
- 将仪表盘 (2) 安装到前仪表板上。
Show/hide table
| | |
| 图 14 | g00520611 |
- 安装螺钉 (1) 。
- 将蓄电池断路开关转到开启位置。
Caterpillar Information System:
784C and 785C Off-Highway Trucks Machine Systems Electronic Control Module (Brake) - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0805 FMI 09 Interface Module (No. 5) Abnormal Update - Test
824G , 825G and 826G Landfill Compactor Compactor Wheel Tamping Tips - Inspect/Replace
3406E On-Highway Engine Fan Drive - Disassemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0804 FMI 09 Interface Module (No. 4) Abnormal Update - Test
D250E Series II and D300E Series II Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Assemble
824G , 825G and 826G Landfill Compactor Tilt Hood
3524B Engines for Off-Highway Trucks Too Much Valve Lash
3406E On-Highway Engine Housing (Front) - Install
3406E On-Highway Engine Housing (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Assemble
CB-534C and CB-634C Vibratory Compactors Steering System General Information
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0806 FMI 09 Interface Module (No. 6) Abnormal Update - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0807 FMI 09 Interface Module (No. 7) Abnormal Update - Test
3304B and 3306B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0808 FMI 09 Interface Module (No. 8) Abnormal Update - Test
980G Wheel Loader Power Train Trunnion Support (Oscillating Axle, Rear) - Remove and Install
3406E On-Highway Engine Fan Drive - Assemble
D250E Series II and D300E Series II Articulated Trucks Machine Systems Rear Axle Stabilizer Rod - Remove and Install
3406E On-Highway Engine Fan Drive - Remove
3406E and 3456 Generator Set Engines Fan Drive - Install
527 Track-Type Skidder Power Train Final Drive
Caterpillar Monitoring System Charging System Display Mode
773D Off-Highway Truck and 775D Quarry Truck Air System and Brakes Service and Parking Brake (Rear)