Housing (Front) - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Thoroughly clean the old gasket material from front plate (3). Install a new gasket (8) on front plate (3).
Show/hide table
Illustration 2 g00579584 - Thoroughly clean the old gasket material from front housing (2) and install front housing (2) on the two dowel pins.
Show/hide table
Illustration 3 g00579582 - Install bolts (5), nut (6), and nuts (7) on front housing (2).
Show/hide table
Illustration 4 g00579581 - Install bolts (4) that fasten front plate (3) to front housing (2).
Show/hide table
Illustration 5 g00579579 - Install nut (1) on the stud.
Show/hide table
NOTICE |
---|
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine. |
Show/hide table
Illustration 1 | g00579585 |
End By:
- Install the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
- Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".
- Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".
- Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
- Install the crankshaft front seal and the wear sleeve. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
- Install the camshaft gear. Refer to Disassembly and Assembly, "Camshaft Gear - Remove and Install".
Caterpillar Information System:
3406E On-Highway Engine Housing (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Assemble
CB-534C and CB-634C Vibratory Compactors Steering System General Information
3524B Engines for Off-Highway Trucks Too Much Vibration
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering System Pressure - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering System Pressure - Test
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Service Brake (Front Caliper)
980G Wheel Loader Power Train Trunnion Support (Oscillating Axle, Front) - Remove and Install
CB-534C and CB-634C Vibratory Compactors Steering System Metering Pump (Steering)
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Disassemble
IT28G Integrated Toolcarrier Maintenance Interval Schedule
784C and 785C Off-Highway Trucks Machine Systems Body and Canopy - Remove
3524B Engines for Off-Highway Trucks Too Much Valve Lash
824G , 825G and 826G Landfill Compactor Tilt Hood
D250E Series II and D300E Series II Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Assemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0804 FMI 09 Interface Module (No. 4) Abnormal Update - Test
3406E On-Highway Engine Fan Drive - Disassemble
824G , 825G and 826G Landfill Compactor Compactor Wheel Tamping Tips - Inspect/Replace
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0805 FMI 09 Interface Module (No. 5) Abnormal Update - Test
784C and 785C Off-Highway Trucks Machine Systems Electronic Control Module (Brake) - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Quad Gauge Module - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0806 FMI 09 Interface Module (No. 6) Abnormal Update - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0807 FMI 09 Interface Module (No. 7) Abnormal Update - Test
3304B and 3306B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install