Service Brake (Front Caliper)
Show/hide table
Illustration 1 | g00517640 |
Show/hide table
Illustration 2 | g00517778 |
Section A-A |
(1) Torque for 18 bolts ... 750 ± 80 N·m (553 ± 59 lb ft)
(2) Torque for 17 bolts ... 750 ± 80 N·m (553 ± 59 lb ft)
(3) Torque for eight bolts ... 750 ± 80 N·m (553 ± 59 lb ft)
(4) Bolts
- Quantity ... 4
- Final torque ... 47.6 ± 4.1 N·m (35.1 ± 3.0 lb ft)
(5) Pins
- Quantity ... Four
(6) Disc
- New disc thickness ... 19.05 ± 0.50 mm (0.750 ± 0.020 inch)
Note: The clearance between pins (5) and disc (6) must not be less than 1.5 ± 0.5 mm (0.06 ± 0.02 inch). Check in four places. If the clearance is less than 1.5 ± 0.5 mm (0.06 ± 0.02 inch), turn bolts (4) counterclockwise by one turn. Slide pins (5) in order to provide 1.5 ± 0.5 mm (0.06 ± 0.02 inch) clearance. Torque bolts (4) to 47.6 ± 4.1 N·m (35.1 ± 3.0 lb ft).
(7) Lining
- New lining thickness ... 16.5 mm (0.64 inch)
- New lining thickness plus the thickness of the carrier ... 24.9 mm (0.98 inch)
Caterpillar Information System:
980G Wheel Loader Power Train Trunnion Support (Oscillating Axle, Front) - Remove and Install
CB-534C and CB-634C Vibratory Compactors Steering System Metering Pump (Steering)
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Disassemble
IT28G Integrated Toolcarrier Maintenance Interval Schedule
784C and 785C Off-Highway Trucks Machine Systems Body and Canopy - Remove
784C and 785C Off-Highway Trucks Machine Systems Door Panel (Right) - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Door Panel (Left) - Remove and Install
554 Forwarder and 574 Forwarder Changing Direction and Speed
824G , 825G and 826G Landfill Compactor Steering Frame Lock
3406E and 3456 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
3406E On-Highway Engine Rocker Arm and Shaft - Install
784C and 785C Off-Highway Trucks Machine Systems Door Handle and Latch - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering System Pressure - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering System Pressure - Test
3524B Engines for Off-Highway Trucks Too Much Vibration
CB-534C and CB-634C Vibratory Compactors Steering System General Information
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Assemble
3406E On-Highway Engine Housing (Front) - Remove
3406E On-Highway Engine Housing (Front) - Install
3524B Engines for Off-Highway Trucks Too Much Valve Lash
824G , 825G and 826G Landfill Compactor Tilt Hood
D250E Series II and D300E Series II Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Assemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0804 FMI 09 Interface Module (No. 4) Abnormal Update - Test
3406E On-Highway Engine Fan Drive - Disassemble