CB-534C and CB-634C Vibratory Compactors Steering System Caterpillar


Metering Pump (Steering)

Usage:

CB-534C 1WS



Illustration 1g00712260

Displacement ... 293 cm3/rev (17.9 in3/rev)

Nominal flow ... 19 L/min (5 US gpm)

Maximum pressure ... 17500 kPa (2538 psi)

Inlet relief pressure ... 15000 kPa (2176 psi)

Caterpillar Information System:

3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Disassemble
IT28G Integrated Toolcarrier Maintenance Interval Schedule
784C and 785C Off-Highway Trucks Machine Systems Body and Canopy - Remove
784C and 785C Off-Highway Trucks Machine Systems Door Panel (Right) - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Door Panel (Left) - Remove and Install
554 Forwarder and 574 Forwarder Changing Direction and Speed
824G , 825G and 826G Landfill Compactor Steering Frame Lock
3406E and 3456 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
3406E On-Highway Engine Rocker Arm and Shaft - Install
784C and 785C Off-Highway Trucks Machine Systems Door Handle and Latch - Remove
824G , 825G and 826G Landfill Compactor Compactor Wheel Chopper Blades - Inspect/Replace
793C Off-Highway Truck/Tractor Power Train Oil Filter and Base (Transmission Charging) - Disassemble
980G Wheel Loader Power Train Trunnion Support (Oscillating Axle, Front) - Remove and Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Service Brake (Front Caliper)
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering System Pressure - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering System Pressure - Test
3524B Engines for Off-Highway Trucks Too Much Vibration
CB-534C and CB-634C Vibratory Compactors Steering System General Information
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Assemble
3406E On-Highway Engine Housing (Front) - Remove
3406E On-Highway Engine Housing (Front) - Install
3524B Engines for Off-Highway Trucks Too Much Valve Lash
824G , 825G and 826G Landfill Compactor Tilt Hood
D250E Series II and D300E Series II Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.