Door Panel (Left) - Remove and Install
- 使用螺丝刀从 (拉手组件) 1 卸下管帽 (2)。
Show/hide table
图 3 g00580901 - 卸下螺栓 (3),以拆下拉手组件 (1)。
Show/hide table
图 4 g00580933 - 松开固定螺钉 (5),以从车门把手上卸下圆头手柄 (4)。
Show/hide table
图 5 g00580935 - 使用螺丝刀从面板组件 (7) 上撬开摇臂开关组件 (6)。
Show/hide table
图 6 g00580937 - 从摇臂开关组件 (6) 拆下线束组件 (8)。
Show/hide table
图 7 g00580942 注: 为便于安装,在所有螺栓、螺钉和垫圈上做好标记。
- 卸下螺栓 (11),以从面板组件 (7) 卸下门挡 (10)。
- 从面板组件 (7) 上卸下圆头螺钉 (12)。
- 卸下大圆头螺钉 (9),以拆下面板组件 (7)。
Show/hide table
图 1 | g00521987 |
Show/hide table
图 2 | g00580906 |
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件名称 | 数量 |
A | 4C-9613 | 硅密封剂 | 1 |
- 安装之前,确认面板组件 (7) 的所有部件都清洁无异物。
- 检查所有部件是否磨损,必要时更换部件。
注: 安装之前,在面板组件 (7) 的背面涂抹 (A)。
- 使用大圆头螺钉 (9) 安装面板组件 (7),如图所示。
- 将圆头螺钉 (12) 安装到面板组件 (7) 中。
- 使用螺栓 (11) 将门挡 (10) 安装到面板组件 (7)。
Show/hide table
图 9 g00580937 - 将线束组件 (8) 连接到摇臂开关组件 (6)。
Show/hide table
图 10 g00580935 - 将摇臂开关组件 (6) 按入面板组件 (7) 中。
Show/hide table
图 11 g00580933 - 将圆头手柄 (4) 安放在车门把手上面,如图所示。 拧紧固定螺钉 (5)。
Show/hide table
图 12 g00580901 - 使用螺栓 (3) 安装拉手组件 (1)。
Show/hide table
图 13 g00580906 - 在 (拉手组件) 1 上安装螺帽 (2)。
Show/hide table
图 8 | g00580942 |
Caterpillar Information System:
554 Forwarder and 574 Forwarder Changing Direction and Speed
824G , 825G and 826G Landfill Compactor Steering Frame Lock
3406E and 3456 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
3406E On-Highway Engine Rocker Arm and Shaft - Install
784C and 785C Off-Highway Trucks Machine Systems Door Handle and Latch - Remove
824G , 825G and 826G Landfill Compactor Compactor Wheel Chopper Blades - Inspect/Replace
793C Off-Highway Truck/Tractor Power Train Oil Filter and Base (Transmission Charging) - Disassemble
793C Off-Highway Truck/Tractor Power Train Lateral Control Rod (Rear Axle Housing) - Disassemble
3406E On-Highway Engine Inlet and Exhaust Valve Springs - Remove and Install
3524B Engines for Off-Highway Trucks Excessive White Smoke
3406C Engines for Caterpillar Built Machines Flywheel
3176C and 3196 Industrial Engines Cylinder Head - Remove
784C and 785C Off-Highway Trucks Machine Systems Door Panel (Right) - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Body and Canopy - Remove
IT28G Integrated Toolcarrier Maintenance Interval Schedule
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Disassemble
CB-534C and CB-634C Vibratory Compactors Steering System Metering Pump (Steering)
980G Wheel Loader Power Train Trunnion Support (Oscillating Axle, Front) - Remove and Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Service Brake (Front Caliper)
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering System Pressure - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering System Pressure - Test
3524B Engines for Off-Highway Trucks Too Much Vibration
CB-534C and CB-634C Vibratory Compactors Steering System General Information
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Assemble