Cylinder Head - Remove
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 185-3630 | 带式扳手总成 | 1 |
开始:
- 拆除配气机构盖的底座。 请参阅拆解和组装 , "气门机构罩盖底座 - 拆卸和安装" 。
- 拆下摇臂轴组件和推杆。 请参阅拆解和组装 , "摇臂轴和推杆 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 拆下螺栓 (1)。 拆下夹子 (2)。
- 将传感器从发动机配线线束 ( 3) 上断开。
- 拆除传感器。
Show/hide table
图 2 g00517351 - 卸下螺栓 (5)。 断开管组件 (4) 并拆除 O 形密封圈。
- 拆下螺栓 (7)。 断开管组件 (6) 并拆除 O 形密封圈。
Show/hide table
图 3 g00517354 典型实例 - 使用工具 (A) 卸下燃油滤清器 ( 8)。 断开软管 (9)。 立即堵住所有开口。
- 松开螺栓 (11)。 断开配线线束 (10)。
Show/hide table
图 4 g00517355 典型实例 - 断开传感器接头 ( 13) 和夹子 (12)。 拆下夹子 (14) 和螺栓。
Show/hide table
图 5 g00517356 典型实例 - 拆下螺栓 (15)。
- 拆下出水歧管 (16)。
Show/hide table
图 6 g00517359 - 拆下缸盖螺栓 (17)。
- 将出水歧管密封垫 ( 18) 从缸盖 (19) 上拆除。
Show/hide table
图 7 g00517361 - 将合适的起吊设备连接到缸盖 ( 19)。 将缸盖 (19) 从缸体上拆下。 缸盖 (19) 的重量为
135 kg (300 lb) 。 - 将缸盖密封垫 (20) 和O 形密封圈 (21) 从缸体上拆下。
Show/hide table
图 1 | g00517348 |
Caterpillar Information System:
3406E On-Highway Engine Rocker Arm - Assemble
3406E On-Highway Engine Rocker Arm - Disassemble
773D Off-Highway Truck and 775D Quarry Truck Air System and Brakes Front Wheel
784C and 785C Off-Highway Trucks Machine Systems Door Handle and Latch - Install
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft - Install
824G , 825G and 826G Landfill Compactor Implement Lockout Control
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft - Remove
527 Track-Type Skidder Power Train Equalizer Bar
CB-534C and CB-634C Vibratory Compactors Steering System Bypass Valve
3406C Engines for Caterpillar Built Machines Engine Trunnion
574B Forwarder Operation Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic)
3406C Engines for Caterpillar Built Machines Flywheel
3524B Engines for Off-Highway Trucks Excessive White Smoke
3406E On-Highway Engine Inlet and Exhaust Valve Springs - Remove and Install
793C Off-Highway Truck/Tractor Power Train Lateral Control Rod (Rear Axle Housing) - Disassemble
793C Off-Highway Truck/Tractor Power Train Oil Filter and Base (Transmission Charging) - Disassemble
824G , 825G and 826G Landfill Compactor Compactor Wheel Chopper Blades - Inspect/Replace
784C and 785C Off-Highway Trucks Machine Systems Door Handle and Latch - Remove
3406E On-Highway Engine Rocker Arm and Shaft - Install
3406E and 3456 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
824G , 825G and 826G Landfill Compactor Steering Frame Lock
554 Forwarder and 574 Forwarder Changing Direction and Speed
784C and 785C Off-Highway Trucks Machine Systems Door Panel (Left) - Remove and Install