Rocker Arm - Disassemble
Start By:
- Remove the rocker arms and the rocker shaft. Refer to Disassembly and Assembly, "Rocker Arm and Shaft - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove valve rocker arms (7) and unit injector rocker arm (2) from rocker shaft (3).
Note: Check the condition of all components. Replace any worn components or damaged components with new parts.
Note: Do not reuse the O-ring seals on the rocker arm adjustment screws if the buttons have been removed from the adjustment screws.
- Remove button (6) from adjuster screw (5) in valve rocker arm (7).
- Remove button (4) from adjuster screw (1) in unit injector rocker arm (2).
- Repeat Steps 1 through 3 for the remaining rocker arm assemblies.
Show/hide table
Illustration 1 | g01028860 |
Caterpillar Information System:
773D Off-Highway Truck and 775D Quarry Truck Air System and Brakes Front Wheel
784C and 785C Off-Highway Trucks Machine Systems Door Handle and Latch - Install
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft - Install
824G , 825G and 826G Landfill Compactor Implement Lockout Control
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft - Remove
527 Track-Type Skidder Power Train Equalizer Bar
CB-534C and CB-634C Vibratory Compactors Steering System Bypass Valve
3406C Engines for Caterpillar Built Machines Engine Trunnion
574B Forwarder Operation Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic)
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Front Wheel
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Electronic Control Module (Power Train)
3406E On-Highway Engine Rocker Arm - Assemble
3176C and 3196 Industrial Engines Cylinder Head - Remove
3406C Engines for Caterpillar Built Machines Flywheel
3524B Engines for Off-Highway Trucks Excessive White Smoke
3406E On-Highway Engine Inlet and Exhaust Valve Springs - Remove and Install
793C Off-Highway Truck/Tractor Power Train Lateral Control Rod (Rear Axle Housing) - Disassemble
793C Off-Highway Truck/Tractor Power Train Oil Filter and Base (Transmission Charging) - Disassemble
824G , 825G and 826G Landfill Compactor Compactor Wheel Chopper Blades - Inspect/Replace
784C and 785C Off-Highway Trucks Machine Systems Door Handle and Latch - Remove
3406E On-Highway Engine Rocker Arm and Shaft - Install
3406E and 3456 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
824G , 825G and 826G Landfill Compactor Steering Frame Lock