Fan Drive - Disassemble
Start By:
- Remove the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Remove".
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (8).
- Remove the fan adapter from pulley (5).
- Remove bolts (11) and retainer (10). Remove O-ring seal (7).
- Remove pulley (5) from shaft assembly (1).
- Remove bearing (9) and spacer (6) from pulley (5). Remove spacer (2), lip seal (3), and bearing (4) from pulley (5).
Show/hide table
| |
| Illustration 1 | g01029786 |
Caterpillar Information System:
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0804 FMI 09 Interface Module (No. 4) Abnormal Update - Test
D250E Series II and D300E Series II Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Assemble
824G , 825G and 826G Landfill Compactor Tilt Hood
3524B Engines for Off-Highway Trucks Too Much Valve Lash
3406E On-Highway Engine Housing (Front) - Install
3406E On-Highway Engine Housing (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Assemble
CB-534C and CB-634C Vibratory Compactors Steering System General Information
3524B Engines for Off-Highway Trucks Too Much Vibration
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering System Pressure - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering System Pressure - Test
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Service Brake (Front Caliper)
824G , 825G and 826G Landfill Compactor Compactor Wheel Tamping Tips - Inspect/Replace
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0805 FMI 09 Interface Module (No. 5) Abnormal Update - Test
784C and 785C Off-Highway Trucks Machine Systems Electronic Control Module (Brake) - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Quad Gauge Module - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0806 FMI 09 Interface Module (No. 6) Abnormal Update - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0807 FMI 09 Interface Module (No. 7) Abnormal Update - Test
3304B and 3306B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0808 FMI 09 Interface Module (No. 8) Abnormal Update - Test
980G Wheel Loader Power Train Trunnion Support (Oscillating Axle, Rear) - Remove and Install
3406E On-Highway Engine Fan Drive - Assemble
D250E Series II and D300E Series II Articulated Trucks Machine Systems Rear Axle Stabilizer Rod - Remove and Install
3406E On-Highway Engine Fan Drive - Remove