Transmission Oil Pump
Show/hide table
 | |
| Illustration 1 | g00517990 |
Transmission Oil Pump (A) Transmission clutch control section. (B) Steering clutch and brake lubrication section. (C) Torque converter scavenge section. | |
The transmission oil pump is a three-section gear type pump. The pump is driven by a gear in the torque converter housing. The pump is fastened to the right side of the torque converter housing.
Show/hide table
 | |
| Illustration 2 | g00517992 |
Power Train Oil Lines (1) Outlet line for the steering clutch and brake lubrication section. (2) Outlet line for the transmission clutch control section. (3) Inlet for the steering clutch and brake lubrication section. (4) Inlet for the transmission clutch control section. | |
Note: The inlet and the outlet for the torque converter scavenge section are located in the torque converter housing.
Caterpillar Information System:
793C and 793C XQ Off-Highway Trucks Hydraulic System Position Sensor (Truck Body) - Adjust
793C and 793C XQ Off-Highway Trucks Hydraulic System Position Sensor (Dump Body)
773D Off-Highway Truck and 775D Quarry Truck Air System and Brakes Service and Parking Brake (Rear)
Caterpillar Monitoring System Charging System Display Mode
527 Track-Type Skidder Power Train Final Drive
3406E and 3456 Generator Set Engines Fan Drive - Install
3406E On-Highway Engine Fan Drive - Remove
D250E Series II and D300E Series II Articulated Trucks Machine Systems Rear Axle Stabilizer Rod - Remove and Install
3406E On-Highway Engine Fan Drive - Assemble
980G Wheel Loader Power Train Trunnion Support (Oscillating Axle, Rear) - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0808 FMI 09 Interface Module (No. 8) Abnormal Update - Test
3304B and 3306B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Valve (Suspension Cylinder Charging) - Install
793C and 793C XQ Off-Highway Trucks Hydraulic System General Information
572R Pipelayer Engine Supplement Precleaner - Remove and Install
572R Pipelayer Engine Supplement Air Cleaner - Remove and Install
572R Pipelayer Engine Supplement Turbocharger - Remove and Install
D7R Track-Type Tractor Engine Supplement Fan Drive - Disassemble
D7R Track-Type Tractor Engine Supplement Fan Drive - Assemble
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinders
3406E On-Highway Engine Coolant Temperature Sensor - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Machine Systems Center Axle Stabilizer Rod - Remove and Install
527 Track-Type Skidder Power Train Testing and Adjusting
Caterpillar Monitoring System Engine Oil Pressure Display Mode