Fan Drive - Disassemble
Disassembly Procedure
Start By:
- Remove the fan drive.
Reference: Refer to Disassembly and Assembly, "Fan and Fan Drive - Remove and Install" in this module.
- Remove bolt (1) and plate (2) from the shaft.
Show/hide table
Illustration 1 | g00660121 |
- Remove fan pulley (5) and hub (4) from shaft (3) .
Show/hide table
Illustration 2 | g00660125 |
- Remove bearing cone (6) from hub (4) .
Show/hide table
Illustration 3 | g00660130 |
- Remove spacer (7) from hub (4) .
Show/hide table
Illustration 4 | g00660131 |
- Remove spacer (8) and pulley (5) from hub (4) .
Show/hide table
Illustration 5 | g00660134 |
- Remove seal (9) from hub (4) .
Show/hide table
Illustration 6 | g00660093 |
- Remove bearing cone (10) from hub (4) .
Show/hide table
Illustration 7 | g00660137 |
- Use a brass drift to force two bearing cups (11) out of hub ( 4) .
Show/hide table
Illustration 8 | g00660144 |
Caterpillar Information System:
572R Pipelayer Engine Supplement Turbocharger - Remove and Install
572R Pipelayer Engine Supplement Air Cleaner - Remove and Install
572R Pipelayer Engine Supplement Precleaner - Remove and Install
793C and 793C XQ Off-Highway Trucks Hydraulic System General Information
784C and 785C Off-Highway Trucks Machine Systems Valve (Suspension Cylinder Charging) - Install
527 Track-Type Skidder Power Train Transmission Oil Pump
793C and 793C XQ Off-Highway Trucks Hydraulic System Position Sensor (Truck Body) - Adjust
793C and 793C XQ Off-Highway Trucks Hydraulic System Position Sensor (Dump Body)
773D Off-Highway Truck and 775D Quarry Truck Air System and Brakes Service and Parking Brake (Rear)
Caterpillar Monitoring System Charging System Display Mode
527 Track-Type Skidder Power Train Final Drive
3406E and 3456 Generator Set Engines Fan Drive - Install
D7R Track-Type Tractor Engine Supplement Fan Drive - Assemble
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinders
3406E On-Highway Engine Coolant Temperature Sensor - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Machine Systems Center Axle Stabilizer Rod - Remove and Install
527 Track-Type Skidder Power Train Testing and Adjusting
Caterpillar Monitoring System Engine Oil Pressure Display Mode
3406E On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Cab - Install
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Engine Front Support - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Transmission Gear Indicator
Caterpillar Monitoring System Charge Pressure Display Mode
517 Track-Type Skidder Engine Supplement Air Cleaner - Remove and Install