Fuel Filter Base - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 2P-8250 | 带式扳手总成 | 1 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
机器做检查、保养、测试、调整和修理时，必须小心，不让油液流出。 在打开任何舱室或解体任何储有液体的零件之前，要准备好合适的容器收集流出液体。 有关可提供予卡特彼勒机器的工具及适合于盛装油液的容器，请参阅专门出版物, NENG2500, "卡特彼勒工具及车间用品指南"。 按照本地法规和指令处置所有液体。 |
- 使用工具 (A) 拆下燃油滤清器 (4) 。
Show/hide table
 | |
| 图 1 | g00468389 |
- 将燃油管 (1) 从燃油滤清器底座 (2) 上断开。
- 从燃油喷油泵壳体上拆下两根螺栓 (3) 、垫圈、燃油滤清器底座 (2) 和密封垫。
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 2P-8250 | 带式扳手总成 | 1 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将密封垫、燃油滤清器底座 (2) 、垫圈和两根螺栓 (3) 安装到燃油喷油泵壳体上。
Show/hide table
| | |
| 图 2 | g00468389 |
注: 检查密封垫的状况。 如果密封垫磨损或损坏，则用新零件更换。
- 将燃油管 (1) 连接到燃油滤清器底座 (2) 上。
- 使用工具 (A) 安装燃油滤清器 (4) 。
Caterpillar Information System:
3406E Truck Engine Fuel Filter (Primary)
793C Off-Highway Truck Machine Systems Cover (Cab Rear) - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Lever (Front) - Remove and Install
572R Pipelayer Hydraulic System Pressure Reducing Valve
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Remove
IT28G Integrated Toolcarrier Air Conditioner - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines General Information
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Lever (Front) and Tilt Link (Front) - Remove
572R Pipelayer Hydraulic System Counterweight Control Valve
IT28G Integrated Toolcarrier Battery - Inspect
793C Off-Highway Truck Machine Systems Window Wiper Motor - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Pressure Control Valve - Shift Valve
IT28G Integrated Toolcarrier Battery, Battery Cable or Battery Disconnect Switch - Replace
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
572R Pipelayer Hydraulic System Boom Kickout Valve
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Lubrication System
793C Off-Highway Truck Machine Systems Window Wiper Motor - Disassemble
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train General Information
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Hydrostatic Drive System - 580 Wheel Harvester
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Manifold and Solenoid Valve (Pilot Diverter, 4 Function Hydraulics) - Remove and Install