1. Home
  2. Caterpillar
  3. Operation and Maintenance Manual
  4. #i00917576

IT28G Integrated Toolcarrier Caterpillar


Battery, Battery Cable or Battery Disconnect Switch - Replace

Usage:

IT28G 8CR

  • Turn the engine start switch to the OFF position. Turn all switches to the OFF position.
      Show/hide table

      Illustration 1g00468472

    1. Remove the access panel for the battery on the left side of the machine.
      Show/hide table

      Illustration 2g00484720

    1. Turn the battery disconnect switch to the OFF position. Remove the battery disconnect switch key.

      Show/hide table
      NOTICE

      Do not allow the disconnected battery cable to contact the disconnect switch.

    1. At the battery disconnect switch, disconnect the negative battery cable that is connected to the frame.
      Show/hide table

      Illustration 3g00463910

    1. Disconnect the negative battery cable at the battery.

    1. Perform the necessary repairs. Replace the cable or the battery, as needed.

    1. Connect the negative battery cable at the battery. Replace the battery cover.

    1. Connect the battery cable at the battery disconnect switch, if equipped. If the machine is not equipped with a battery disconnect switch, connect the negative cable to the frame.

    1. Install the battery disconnect switch key. Turn the battery disconnect switch to the ON position.

    • Caterpillar Information System:

    CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Pressure Control Valve - Shift Valve
    793C Off-Highway Truck Machine Systems Window Wiper Motor - Remove and Install
    IT28G Integrated Toolcarrier Battery - Inspect
    572R Pipelayer Hydraulic System Counterweight Control Valve
    3304B and 3306B Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
    3406E Truck Engine Fuel Filter (Primary)
    793C Off-Highway Truck Machine Systems Cover (Cab Rear) - Remove and Install
    IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Lever (Front) - Remove and Install
    572R Pipelayer Hydraulic System Pressure Reducing Valve
    950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Install
    950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Remove
    IT28G Integrated Toolcarrier Air Conditioner - Test
    3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
    572R Pipelayer Hydraulic System Boom Kickout Valve
    3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Lubrication System
    793C Off-Highway Truck Machine Systems Window Wiper Motor - Disassemble
    550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train General Information
    550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Hydrostatic Drive System - 580 Wheel Harvester
    950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Manifold and Solenoid Valve (Pilot Diverter, 4 Function Hydraulics) - Remove and Install
    550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Power Train Charging System
    550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Brake System
    550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Speed Control System
    550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Differential Control System
    550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train All Wheel Drive System
    Back to top
    Contacts My AVS
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.