Cover (Cab Rear) - Remove and Install
Removal Procedure
Start By:
- Install the truck body retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install" for the correct procedure.
- Remove six bolts (1) and the six washers.
Show/hide table
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area. |
Show/hide table
Illustration 1 | g00468254 |
- Remove cover assembly (2). The cover assembly weighs approximately 35 kg (77.2 lb).
Installation Procedure
- Install cover assembly (2). The cover assembly weighs approximately 35 kg (77.2 lb).
Show/hide table
Illustration 2 | g00468254 |
- Install the six washers and six bolts (1) .
End By: Disconnect the truck body retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install" for the correct procedure.
Caterpillar Information System:
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Lever (Front) - Remove and Install
572R Pipelayer Hydraulic System Pressure Reducing Valve
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Remove
IT28G Integrated Toolcarrier Air Conditioner - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines General Information
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Lever (Front) and Tilt Link (Front) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Install
65E, 75E, 85E and 95E Agricultural Tractors Brakes, Indicators and Gauges - Test
3406E Truck Engine Fuel Filter (Primary)
3304B and 3306B Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
572R Pipelayer Hydraulic System Counterweight Control Valve
IT28G Integrated Toolcarrier Battery - Inspect
793C Off-Highway Truck Machine Systems Window Wiper Motor - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Pressure Control Valve - Shift Valve
IT28G Integrated Toolcarrier Battery, Battery Cable or Battery Disconnect Switch - Replace
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
572R Pipelayer Hydraulic System Boom Kickout Valve
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Lubrication System
793C Off-Highway Truck Machine Systems Window Wiper Motor - Disassemble
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train General Information