Tilt Cylinder - Install
Installation Procedure
Note: Before installation, lubricate all pin bores with 5P-0960 Molybdenum Grease .
- Fasten a hoist and suitable lifting slings to tilt cylinder (1) .
Show/hide table
Illustration 1 | g00482068 |
- Use a hoist to install tilt cylinder (1). The weight of the tilt cylinder is 125 kg (275 lb).
- Install pin (7) and bolt (8) .
Show/hide table
Illustration 2 | g00482065 |
- Install plate (6) and bolt (5) .
Show/hide table
Illustration 3 | g00482039 |
- Install pin assembly (4) and bolt (3) .
Show/hide table
Illustration 4 | g00482035 |
- Connect hydraulic hose assemblies (2) .
- Remove the hoist and suitable lifting slings from tilt cylinder (1) .
Show/hide table
Illustration 5 | g00482024 |
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
65E, 75E, 85E and 95E Agricultural Tractors Brakes, Indicators and Gauges - Test
789C Off-Highway Truck Capacities (Refill)
784C and 785C Off-Highway Truck/Tractors Battery Disconnect Switch
789C Off-Highway Truck Plate Locations and Film Locations
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Remove
980G Wheel Loader Braking System Parking Brake
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Oil Filter Base - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Design
966G Wheel Loader and 972G Wheel Loader Braking System Parking Brake Actuator
DASA 280 Measuring and Control System Hand Control Keypads
DASA 280 Measuring and Control System Control Unit
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Attachment Positioner Control - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Lever (Front) and Tilt Link (Front) - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines General Information
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Install
IT28G Integrated Toolcarrier Air Conditioner - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Install
572R Pipelayer Hydraulic System Pressure Reducing Valve
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Lever (Front) - Remove and Install
793C Off-Highway Truck Machine Systems Cover (Cab Rear) - Remove and Install
3406E Truck Engine Fuel Filter (Primary)