784C and 785C Off-Highway Truck/Tractors Caterpillar


Battery Disconnect Switch

Usage:

785C 1HW


Ilustrasi 1g00632457


PERHATIAN

Jangan memutar sakelar pemutus hubungan baterai ke posisi OFF sementara engine sedang hidup. Kerusakan serius pada sistem kelistrikan dapat terjadi.


Catatan: Ketika sebuah sumber tenaga listrik disambungkan ke stopkontak start bantu, sakelar pemutus hubungan baterai akan dipintas dan sistem kelistrikan akan mendapat aliran listrik sewaktu sakelar pemutus hubungan baterai berada dalam posisi OFF (dimatikan). Hal ini memungkinkan dilakukannya start jamper tanpa bergantung pada posisi sakelar pemutus hubungan baterai.

Sakelar Pemutus Hubungan Baterai (1) - Ketika sakelar pemutus hubungan baterai (1) berada pada posisi OFF, seluruh sistem kelistrikan menjadi tidak berfungsi. Ketika sakelar pemutus hubungan baterai diputar ke posisi ON, baterai tetap terhubung ke seluruh sistem kelistrikan.

ON - Untuk mengaktifkan sistem kelistrikan, sisipkan kunci sakelar pemutus dan putar sakelar pemutus hubungan baterai searah jarum jam. Sakelar pemutus hubungan baterai harus diputar ke posisi ON sebelum menghidupkan engine.

OFF - Untuk mematikan sistem kelistrikan, putar sakelar pemutus hubungan baterai ke kiri ke posisi OFF.

Putar sakelar pemutus hubungan baterai ke posisi OFF dan lepaskan kunci sakelar pemutus sewaktu melakukan servis pada sistem kelistrikan atau komponen lainnya pada alat berat.

Putar sakelar pemutus hubungan baterai ke posisi OFF dan lepaskan kunci sakelar pemutus apabila alat berat tidak akan dioperasikan dalam jangka waktu lebih dari sebulan. Hal ini akan mencegah baterai menjadi habis. Permasalahan-permasalahan berikut dapat menyebabkan baterai menjadi habis.

  • Hubung-singkat

  • Arus yang mengalir melalui beberapa komponen

  • Tindakan tidak bertanggung-jawab

Catatan: Sakelar pemutus hubungan baterai tidak membebaskan tekanan hidrolik dari sistem kemudi sekunder atau tekanan hidrolik dari sistem Automatic Retarder Control. Untuk membebaskan tekanan hidrolik, putar sakelar start engine ke posisi OFF. Hal ini akan mengaktifkan katup solenoid untuk membebaskan tekan hidrolik dari akumulator.

Caterpillar Information System:

789C Off-Highway Truck Plate Locations and Film Locations
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Remove
980G Wheel Loader Braking System Parking Brake
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Oil Filter Base - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Design
966G Wheel Loader and 972G Wheel Loader Braking System Parking Brake Actuator
DASA 280 Measuring and Control System Hand Control Keypads
DASA 280 Measuring and Control System Control Unit
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Attachment Positioner Control - Remove and Install
65E, 75E, 85E and 95E Agricultural Tractors After Starting Engine
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Lever (Rear) - Remove and Install
980G Wheel Loader Braking System Parking Brake Control Cable
789C Off-Highway Truck Capacities (Refill)
65E, 75E, 85E and 95E Agricultural Tractors Brakes, Indicators and Gauges - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Lever (Front) and Tilt Link (Front) - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines General Information
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Install
IT28G Integrated Toolcarrier Air Conditioner - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Install
572R Pipelayer Hydraulic System Pressure Reducing Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.