Attachment Positioner Control - Remove and Install
Removal Procedure
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Show/hide table
Illustration 1 | g00480393 |
Note: The attachment positioner is located on the left tilt cylinder.
- Disconnect two electrical connectors (1) (hidden).
Show/hide table
Illustration 2 | g00480583 |
- Remove two bolts (5) and magnetic tube assembly (4) .
Show/hide table
Illustration 3 | g00480580 |
- Remove two bolts (2) and attachment positioner (3) .
Installation Procedure
- Install attachment positioner (3) and two bolts (2) .
Show/hide table
Illustration 4 | g00480580 |
- Install magnetic tube assembly (4). Install two bolts (5) that secure magnetic tube assembly (4) .
- Connect two electrical connectors (1) (hidden).
Show/hide table
Illustration 5 | g00480583 |
- Adjust the attachment positioner. Refer to Operation and Maintenance Manual, SEBU7018, "Attachment Positioner".
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
65E, 75E, 85E and 95E Agricultural Tractors After Starting Engine
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Lever (Rear) - Remove and Install
980G Wheel Loader Braking System Parking Brake Control Cable
793C Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Assemble
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Propel Hydraulic System
D250E Series II and D300E Series II Articulated Trucks Machine Systems Check and Pressure Reducing Valve (Brake Accumulator) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pin Coupler Cylinder - Remove and Install
572R Pipelayer Hydraulic System Pilot Control Valve (Three-Way)
AP-1055B and BG-2455C Asphalt Pavers Conveyor Drive Chains (Drag) - Adjust
AP-1055B and BG-2455C Asphalt Pavers Auger Conveyors - Lubricate - Lubricate the Fittings
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Piston Pump (Drum Propel)
AP-1055B and BG-2455C Asphalt Pavers Capacities (Refill)
DASA 280 Measuring and Control System Control Unit
DASA 280 Measuring and Control System Hand Control Keypads
966G Wheel Loader and 972G Wheel Loader Braking System Parking Brake Actuator
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Design
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Oil Filter Base - Remove and Install
980G Wheel Loader Braking System Parking Brake
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Remove
789C Off-Highway Truck Plate Locations and Film Locations
784C and 785C Off-Highway Truck/Tractors Battery Disconnect Switch
789C Off-Highway Truck Capacities (Refill)
65E, 75E, 85E and 95E Agricultural Tractors Brakes, Indicators and Gauges - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Install