966G Wheel Loader and 972G Wheel Loader Braking System Caterpillar


Parking Brake Actuator

Usage:

972G 1EW



图 1g00102832

(A) 拉杆在任何方向上的最大角度 ... 3°

(B) 完全缩回的执行器连杆长度 ... 29.9 mm (1.18 in)

(B) 完全伸出的执行器连杆长度 ... 87.1 mm (3.43 in)

最大工作压力 ... 20700 kPa
(3000 psi)

Caterpillar Information System:

DASA 280 Measuring and Control System Hand Control Keypads
DASA 280 Measuring and Control System Control Unit
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Attachment Positioner Control - Remove and Install
65E, 75E, 85E and 95E Agricultural Tractors After Starting Engine
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Lever (Rear) - Remove and Install
980G Wheel Loader Braking System Parking Brake Control Cable
793C Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Assemble
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Propel Hydraulic System
D250E Series II and D300E Series II Articulated Trucks Machine Systems Check and Pressure Reducing Valve (Brake Accumulator) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pin Coupler Cylinder - Remove and Install
572R Pipelayer Hydraulic System Pilot Control Valve (Three-Way)
AP-1055B and BG-2455C Asphalt Pavers Conveyor Drive Chains (Drag) - Adjust
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Design
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Oil Filter Base - Remove and Install
980G Wheel Loader Braking System Parking Brake
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Remove
789C Off-Highway Truck Plate Locations and Film Locations
784C and 785C Off-Highway Truck/Tractors Battery Disconnect Switch
789C Off-Highway Truck Capacities (Refill)
65E, 75E, 85E and 95E Agricultural Tractors Brakes, Indicators and Gauges - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Lever (Front) and Tilt Link (Front) - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines General Information
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.