Tilt Lever (Front) and Tilt Link (Front) - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 9U-6600     | Hand Hydraulic Pump     | 1     |
6V-3160 | Double Acting Cylinder     | 1     | |
4C-9633 | Tool Stud     | 1     | |
9U-6833 | Nut     | 1     | |
6V-4035 | Sleeve     | 1     | |
B     | 9U-6600     | Hand Hydraulic Pump     | 1     |
6V-3175 | Double Acting Cylinder     | 1     | |
5P-4184 | Tool Stud     | 1     | |
9U-6832 | Nut     | 1     | |
9S-5431 | Puller Sleeve Assembly     | 1     | |
1P-1835 | Bearing Puller Adapter     | 1     |
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release".
Show/hide table
Illustration 1 | g00482285 |
Note: The front tilt lever and the front tilt link are located on the front of the lift arms.
- Use a hoist and a suitable lifting sling to support tilt cylinder (1), as shown.
Show/hide table
Illustration 2 | g00281643 |
Typical Example |
- Remove bolt (2) and pin (3) .
- Lower tilt cylinder (1) so that the cylinder rests on the lift arm, as shown.
Show/hide table
Illustration 3 | g00483021 |
Typical Example |
- Fasten a hoist and a suitable lifting sling to tilt lever (4) and to tilt links (5) .
- Remove bolt (6) and pin (7) .
Show/hide table
Illustration 4 | g00483024 |
Note: If necessary, remove the grease fitting. Use Tooling (A) in order to remove pin (7) .
- Remove bolt (8), washer (9), and plate (10) .
Show/hide table
Illustration 5 | g00483224 |
Inside View |
- Remove bolt (11), washer (12), spacer (13), pin (14), and washer (15) .
Show/hide table
Illustration 6 | g00483366 |
Note: If necessary, remove the grease fitting. Use Tooling (A) in order to remove pin (14) .
- Use a hoist to remove tilt lever (4) and tilt links (5) as a unit. The total weight of the tilt lever and of the tilt link is 110 kg (242 lb).
- Remove bolt (16), washer (17), and plate (18) .
Show/hide table
Illustration 7 | g00483280 |
- Remove bolt (19), washer (20), spacer (21), pin (22), and washer (23) .
Show/hide table
Illustration 8 | g00483281 |
Note: If necessary, remove the grease fitting. Use Tooling (A) in order to remove pin (22) .
- Remove tilt links (5) from tilt lever (4) .
- Remove lip seals (24), (25), and (26). Repeat for the opposite side of the tilt lever.
Show/hide table
Illustration 9 | g00483282 |
- Use Tooling (B) to remove sleeve bearings (27), (28) and (29) .
Show/hide table
Illustration 10 | g00483284 |
Caterpillar Information System:
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Install
65E, 75E, 85E and 95E Agricultural Tractors Brakes, Indicators and Gauges - Test
789C Off-Highway Truck Capacities (Refill)
784C and 785C Off-Highway Truck/Tractors Battery Disconnect Switch
789C Off-Highway Truck Plate Locations and Film Locations
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Cylinder - Remove
980G Wheel Loader Braking System Parking Brake
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Oil Filter Base - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Design
966G Wheel Loader and 972G Wheel Loader Braking System Parking Brake Actuator
DASA 280 Measuring and Control System Hand Control Keypads
DASA 280 Measuring and Control System Control Unit
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines General Information
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Install
IT28G Integrated Toolcarrier Air Conditioner - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Install
572R Pipelayer Hydraulic System Pressure Reducing Valve
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Lever (Front) - Remove and Install
793C Off-Highway Truck Machine Systems Cover (Cab Rear) - Remove and Install
3406E Truck Engine Fuel Filter (Primary)
3304B and 3306B Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install