Battery - Inspect
Show/hide table
 | |
| Illustration 1 | g00468472 |
The battery compartment is located on the left side at the rear of the machine.
Tighten the battery retainers on all batteries at every 1000 hour interval.
Perform the following procedures at every 1000 hour interval. Check the following areas more often, as required:
- Clean the top of the batteries with a clean cloth.
- Keep the terminals clean and coat the terminals with petroleum jelly.
- Keep the terminal covers in place.
- Remove the access panel for the battery compartment.
- Clean the top of the batteries with a clean cloth. Keep the terminals clean and coated with petroleum jelly. Install the terminal covers after you coat the terminals.
- Replace the access panel for the battery compartment.
Caterpillar Information System:
572R Pipelayer Hydraulic System Counterweight Control Valve
3304B and 3306B Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
3406E Truck Engine Fuel Filter (Primary)
793C Off-Highway Truck Machine Systems Cover (Cab Rear) - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Lever (Front) - Remove and Install
572R Pipelayer Hydraulic System Pressure Reducing Valve
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Remove
IT28G Integrated Toolcarrier Air Conditioner - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System
793C Off-Highway Truck Machine Systems Window Wiper Motor - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Pressure Control Valve - Shift Valve
IT28G Integrated Toolcarrier Battery, Battery Cable or Battery Disconnect Switch - Replace
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
572R Pipelayer Hydraulic System Boom Kickout Valve
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Lubrication System
793C Off-Highway Truck Machine Systems Window Wiper Motor - Disassemble
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train General Information
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Hydrostatic Drive System - 580 Wheel Harvester
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Manifold and Solenoid Valve (Pilot Diverter, 4 Function Hydraulics) - Remove and Install
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Power Train Charging System
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Brake System