Window Wiper Motor - Disassemble
Disassembly Procedure
Start By:
- Remove the window wiper motor. Refer to Disassembly and Assembly, "Window Wiper Motor - Remove and Install" for the correct procedure.
Note: Refer to the Parts Manual for the repair kit. Not all the parts are serviced in this group.
- Position wiper motor assembly (1) on a suitable work bench.
Show/hide table
Illustration 1 | g00468747 |
- Remove three screws (4) in order to separate body (2) from body (3) .
Show/hide table
Illustration 2 | g00468772 |
- Remove valve assembly (5), spool assembly (6), and gear assembly (7) from body (3) .
Show/hide table
Illustration 3 | g00468774 |
- If necessary, remove two O-ring seals (8) from body (2) .
Note: If necessary, remove O-ring seals (8) from body (3) .
Show/hide table
Illustration 4 | g00468775 |
- Remove arm (10) from gear (11) .
Show/hide table
Illustration 5 | g00468776 |
- Remove two bearings (9) from gear (11) .
- Remove retaining ring (12) .
Show/hide table
Illustration 6 | g00468777 |
Show/hide table
Illustration 7 | g00468778 |
Note: Position valve assembly (5) for disassembly.
- Remove O-ring seal (14) from piston (18) .
- Remove cap (17) .
- Remove spool assembly (19) .
- Remove O-ring seals (15) from spool (19) .
- Remove O-ring seal (20) from piston (16) .
- Remove O-ring seals (26) and (28) from spool (27) .
Show/hide table
Illustration 8 | g00468780 |
- Remove screw (21) .
- Remove washer (22) .
- Remove O-ring seal (23) .
- Remove rubber bumper (24) .
- Remove washer (25) .
Caterpillar Information System:
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Lubrication System
572R Pipelayer Hydraulic System Boom Kickout Valve
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
IT28G Integrated Toolcarrier Battery, Battery Cable or Battery Disconnect Switch - Replace
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Pressure Control Valve - Shift Valve
793C Off-Highway Truck Machine Systems Window Wiper Motor - Remove and Install
IT28G Integrated Toolcarrier Battery - Inspect
572R Pipelayer Hydraulic System Counterweight Control Valve
3304B and 3306B Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
3406E Truck Engine Fuel Filter (Primary)
793C Off-Highway Truck Machine Systems Cover (Cab Rear) - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Lever (Front) - Remove and Install
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train General Information
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Hydrostatic Drive System - 580 Wheel Harvester
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Manifold and Solenoid Valve (Pilot Diverter, 4 Function Hydraulics) - Remove and Install
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Power Train Charging System
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Brake System
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Speed Control System
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Differential Control System
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train All Wheel Drive System
69D and 769D Off-Highway Trucks and 771D Quarry Truck Radiator - Install
793C Off-Highway Truck Machine Systems Window Wiper Motor - Assemble
65E, 75E, 85E and 95E Agricultural Tractors Engine Cover - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Cooling System