Window Wiper Motor - Assemble
Assembly Procedure
- Install washer (25) .
Show/hide table
Illustration 1 | g00468780 |
- Install rubber bumper (24) .
- Install O-ring seal (23) .
- Install washer (22) .
- Install screw (21) .
- Install O-ring seals (26) and (28) on spool (27) .
- Install O-ring seal (20) on piston (16) .
Show/hide table
Illustration 2 | g00468777 |
Show/hide table
Illustration 3 | g00468778 |
Note: Position valve assembly (5) for assembly.
- Install O-ring seals (15) on spool (19) .
- Install spool assembly (19) .
- Install cap (17) .
- Install O-ring seal (14) on piston (18) .
- Install retaining ring (12) .
- Install two bearings (9) on gear (11) .
Show/hide table
Illustration 4 | g00468776 |
- Install arm (10) on gear (11) .
- Install two O-ring seals (8) on body (2) .
Note: Install O-ring seals (8) on body (3) .
Show/hide table
Illustration 5 | g00468775 |
- Install gear assembly (7), spool assembly (6), and valve assembly (5) in body (3) .
Show/hide table
Illustration 6 | g00468774 |
- Install three screws (4) in order to connect body (2) to body (3) .
Show/hide table
Illustration 7 | g00468772 |
End By: Install the window wiper motor. Refer to Disassembly and Assembly, "Window Wiper Motor - Remove and Install" for the correct procedure.
Caterpillar Information System:
69D and 769D Off-Highway Trucks and 771D Quarry Truck Radiator - Install
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train All Wheel Drive System
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Differential Control System
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Speed Control System
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Brake System
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Power Train Charging System
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Manifold and Solenoid Valve (Pilot Diverter, 4 Function Hydraulics) - Remove and Install
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Hydrostatic Drive System - 580 Wheel Harvester
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train General Information
793C Off-Highway Truck Machine Systems Window Wiper Motor - Disassemble
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Lubrication System
572R Pipelayer Hydraulic System Boom Kickout Valve
65E, 75E, 85E and 95E Agricultural Tractors Engine Cover - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Cooling System
35, 45 and 55 Agricultural Tractors Charge Pump
65E, 75E, 85E and 95E Agricultural Tractors Engine Crankcase Breather - Clean
G3B, K3A and L3A Denso Alternators Alternator
789C Off-Highway Truck Engine Air Filter Primary Element - Clean/Replace
572R Pipelayer Hydraulic System Combination Valves
789C Off-Highway Truck Engine Air Filter Service Indicator - Inspect
789C Off-Highway Truck Engine Oil Level - Check
789C Off-Highway Truck Engine Oil and Filter - Change
966G Wheel Loader and 972G Wheel Loader Power Train CAT Data Link
789C Off-Highway Truck Ether Starting Aid Cylinder - Replace