Window Wiper Motor - Remove and Install
Removal Procedure
Start By:
- Remove the compartment cover from the front of the cab. Refer to Disassembly and Assembly, "Cover (Cab Front) - Remove and Install" for the correct procedure.
Show/hide table
In order to prevent possible personal injury, release the air pressure from the air tank before disconnecting any components of the air system. |
- Release the pressure in the air tank.
Show/hide table
Illustration 1 | g00468494 |
- Disconnect two tubes (5) .
- Remove retainer (3) .
- Reposition wiper arm assembly (1) .
- If necessary, remove two elbows (6) .
- Remove four bolts (2) and the four washers.
- Remove windshield wiper motor (4) .
Installation Procedure
- Install windshield wiper motor (4) .
Show/hide table
Illustration 2 | g00468494 |
- Install the four washers and four bolts (2) .
- Install two elbows (6) .
- Position wiper arm assembly (1) .
- Install retainer (3) .
- Connect two tubes (5) .
- Refer to Disassembly and Assembly, "Starting with an External Air Supply" in order to refill the air tank.
End By: Install the compartment cover at the front of the cab. Refer to Disassembly and Assembly, "Cover (Cab Front) - Remove and Install" for the correct procedure.
Caterpillar Information System:
IT28G Integrated Toolcarrier Battery - Inspect
572R Pipelayer Hydraulic System Counterweight Control Valve
3304B and 3306B Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
3406E Truck Engine Fuel Filter (Primary)
793C Off-Highway Truck Machine Systems Cover (Cab Rear) - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Lever (Front) - Remove and Install
572R Pipelayer Hydraulic System Pressure Reducing Valve
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Arms - Remove
IT28G Integrated Toolcarrier Air Conditioner - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Lift Cylinder - Remove
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Pressure Control Valve - Shift Valve
IT28G Integrated Toolcarrier Battery, Battery Cable or Battery Disconnect Switch - Replace
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
572R Pipelayer Hydraulic System Boom Kickout Valve
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Lubrication System
793C Off-Highway Truck Machine Systems Window Wiper Motor - Disassemble
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train General Information
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Hydrostatic Drive System - 580 Wheel Harvester
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Manifold and Solenoid Valve (Pilot Diverter, 4 Function Hydraulics) - Remove and Install
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Power Train Charging System
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Brake System
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Speed Control System