Graphics For 149-4890 Brake Spindle Group Which Is Part of 136-4523 And 136-4524 Planetary Groups Is Drawn Incorrectly In The Parts Manual Caterpillar


Graphics For 149-4890 Brake Spindle Group Which Is Part of 136-4523 And 136-4524 Planetary Groups Is Drawn Incorrectly In The Parts Manual

Usage:

ASPHALT PAVERSAP-1000B (7HN),
AP-1055B (8BM, ABB),
BG-260C (8GN),
BG-2455C (6TN, ACM) ASPHALT PAVERS

Problem:

The o-ring and anti-extrusion ring seal kit (1) is illustrated incorrectly in the Parts Manual. The o-ring and anti-extrusion ring are in the wrong positions in two places on the piston spacer in the illustration.

Solution:

When replacing the seal kit on the piston spacer, be aware that the anti-extrusion ring should be assembled towards the motor input side of the brake group. The illustration has been corrected in SIS Web.

COPYRIGHT 2000 CATERPILLAR ALL RIGHTS RESERVED

Caterpillar Information System:

141-6579 Multi-Functional Switch 141-6579 Multi-Functional Switch
Engine Continues To Run With Key Switch Off Engine Continues To Run With Key Switch Off
Debris From Manufacturing Operations Debris From Manufacturing Operations
Testing The Function Of The 3E6477 Relay Assembly (24 Volt) Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Torque For The Enclosed Or Open Rollover Protective Structure (ROPS) Mounting Bolts Torque For The Enclosed Or Open Rollover Protective Structure (ROPS) Mounting Bolts
Transmission Controls (Shift Lever) May Fail Transmission Controls (Shift Lever) May Fail
Dual Pump Group Availability Dual Pump Group Availability
Use Dry Nitrogen To Inflate Tires On Caterpillar Products Use Dry Nitrogen To Inflate Tires On Caterpillar Products
The Pressure/Oil Flow To Engage The Differential Lock Clutch May Be Blocked The Pressure/Oil Flow To Engage The Differential Lock Clutch May Be Blocked
Drive Shaft Bending And/Or Breaking On Augers Drive Shaft Bending And/Or Breaking On Augers
1G-9335 Pressure Control Pilot (PCP) Performance Test Procedure 1G-9335 Pressure Control Pilot (PCP) Performance Test Procedure
Reduction Of Structural Stress On The Circle And Front Frame Assemblies Reduction Of Structural Stress On The Circle And Front Frame Assemblies
ENGINE SOFTWARE CAN CAUSE HARD COLD START ENGINE SOFTWARE CAN CAUSE HARD COLD START
Failure Of The Brake Release Pump (Electric) Failure Of The Brake Release Pump (Electric)
The Lift Cylinders May Contact The Axle Mount Casting The Lift Cylinders May Contact The Axle Mount Casting
Wastegate Air Line Filter Now Available For Certain 793, 793B And 793C Off-Highway Trucks Wastegate Air Line Filter Now Available For Certain 793, 793B And 793C Off-Highway Trucks
Low Oil Pressure Alarm Switch Low Oil Pressure Alarm Switch
Connecting Rod Bearings Connecting Rod Bearings
Hitch Valve May Need Adjustment On Hitch-Ready Tractors Hitch Valve May Need Adjustment On Hitch-Ready Tractors
7S-5106 Chuck May Have Two Different Thread Engagements 7S-5106 Chuck May Have Two Different Thread Engagements
Grease Line On The Hoist Cylinder Of 777D Off-Highway Trucks May Be Located Incorrectly Grease Line On The Hoist Cylinder Of 777D Off-Highway Trucks May Be Located Incorrectly
Bond Failure Of The Transmission Friction Disc Bond Failure Of The Transmission Friction Disc
Wear Limits For The Mounts For The Rear Suspension Wear Limits For The Mounts For The Rear Suspension
Correct Routing Of 159-2993 Cable Assembly In Cold Weather Start Attachment Correct Routing Of 159-2993 Cable Assembly In Cold Weather Start Attachment
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.