Torque For The Enclosed Or Open Rollover Protective Structure (ROPS) Mounting Bolts
Usage:
LOAD HAUL DUMPR2900 (5TW321-UP) LOAD HAUL DUMP
Problem:
Illustration 1.
If the standard bolt torque of 1300 ± 150 N·m (960 ± 110 lb ft) is applied to 8F-4486 Bolt (1), the thread in the mount will strip.
Solution:
Torque three 8F-4486 Bolts (1) to 949 + 54 - 0 N·m (700 + 40 - 0 lb ft).
The design of the mount will be reviewed.
COPYRIGHT 2000 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Transmission Controls (Shift Lever) May Fail Transmission Controls (Shift Lever) May Fail
Dual Pump Group Availability Dual Pump Group Availability
Use Dry Nitrogen To Inflate Tires On Caterpillar Products Use Dry Nitrogen To Inflate Tires On Caterpillar Products
The Pressure/Oil Flow To Engage The Differential Lock Clutch May Be Blocked The Pressure/Oil Flow To Engage The Differential Lock Clutch May Be Blocked
Drive Shaft Bending And/Or Breaking On Augers Drive Shaft Bending And/Or Breaking On Augers
1G-9335 Pressure Control Pilot (PCP) Performance Test Procedure 1G-9335 Pressure Control Pilot (PCP) Performance Test Procedure
Reduction Of Structural Stress On The Circle And Front Frame Assemblies Reduction Of Structural Stress On The Circle And Front Frame Assemblies
Certain Pavers May Turn Slightly When Starting And Stopping Certain Pavers May Turn Slightly When Starting And Stopping
Propel Pump Servo Control Test Procedure Propel Pump Servo Control Test Procedure
Reduction Of Structural Stress On The Circle And Front Frame Assemblies Reduction Of Structural Stress On The Circle And Front Frame Assemblies
Loss Of Electronic Transmission Control Settings Loss Of Electronic Transmission Control Settings
Correct Installation Of The Centre Drive Shaft Correct Installation Of The Centre Drive Shaft
Testing The Function Of The 3E6477 Relay Assembly (24 Volt) Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Debris From Manufacturing Operations Debris From Manufacturing Operations
Engine Continues To Run With Key Switch Off Engine Continues To Run With Key Switch Off
141-6579 Multi-Functional Switch 141-6579 Multi-Functional Switch
Graphics For 149-4890 Brake Spindle Group Which Is Part of 136-4523 And 136-4524 Planetary Groups Is Drawn Incorrectly In The Parts Manual Graphics For 149-4890 Brake Spindle Group Which Is Part of 136-4523 And 136-4524 Planetary Groups Is Drawn Incorrectly In The Parts Manual
ENGINE SOFTWARE CAN CAUSE HARD COLD START ENGINE SOFTWARE CAN CAUSE HARD COLD START
Failure Of The Brake Release Pump (Electric) Failure Of The Brake Release Pump (Electric)
The Lift Cylinders May Contact The Axle Mount Casting The Lift Cylinders May Contact The Axle Mount Casting
Wastegate Air Line Filter Now Available For Certain 793, 793B And 793C Off-Highway Trucks Wastegate Air Line Filter Now Available For Certain 793, 793B And 793C Off-Highway Trucks
Low Oil Pressure Alarm Switch Low Oil Pressure Alarm Switch
Connecting Rod Bearings Connecting Rod Bearings
Hitch Valve May Need Adjustment On Hitch-Ready Tractors Hitch Valve May Need Adjustment On Hitch-Ready Tractors