Correction Of Torque For Bearing Support Bolts
Usage:
PAVING PRODUCTSPS-300B
Problem:
Torques published in KENR2704 result in bearing support bolts being improperly torqued.
Solution:
The correct torque for chain case to differential bolts (2) is 140±10 N·m (104±7 ft lb). The bolts (2) must be coated with 154-9731 High Strength Thread Lock before installation.
The correct torque for chain case to bearing support bolts (1) is 55±10 N·m (41±7 ft lb).
COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Park Brake Solenoid Valve Troubleshooting Procedure Park Brake Solenoid Valve Troubleshooting Procedure
Correct Installation Of Torque Converter Sleeve Bearing Correct Installation Of Torque Converter Sleeve Bearing
E-Stick Pedal Linkage Change E-Stick Pedal Linkage Change
Correction To Service Letter PS5571-Bevel Gear Rework Correction To Service Letter PS5571-Bevel Gear Rework
The Nuts And Bolts That Fasten The Engine Oil Filter Base To The Engine Cylinder Block May Be Loose The Nuts And Bolts That Fasten The Engine Oil Filter Base To The Engine Cylinder Block May Be Loose
Engine Data For Backhoe Loaders Engine Data For Backhoe Loaders
Battery To Starter Motor Connection May Be Loose Battery To Starter Motor Connection May Be Loose
Troubleshooting MTS Belt Untracking Problems Troubleshooting MTS Belt Untracking Problems
Cab Roof Panel May Come Loose Cab Roof Panel May Come Loose
Possible Problems With Dash Lighting On 769D, Through 775D, 785C, 789C And 73C Off-Highway Trucks When The Horn Is Actuated Possible Problems With Dash Lighting On 769D, Through 775D, 785C, 789C And 73C Off-Highway Trucks When The Horn Is Actuated
New Software In Transmission Control (184-4671 Software Group) Offers New Parameters New Software In Transmission Control (184-4671 Software Group) Offers New Parameters
Leakage Of The 133-1863 Core Assembly ("Rear" Brake Oil Cooler) Leakage Of The 133-1863 Core Assembly ("Rear" Brake Oil Cooler)
Bracket For Wheel Chocks Requires Welding At Installation Bracket For Wheel Chocks Requires Welding At Installation
VIMS-PC Version 2.4 Will Not Open After Installation Of Electronic Technician Version 3.0 VIMS-PC Version 2.4 Will Not Open After Installation Of Electronic Technician Version 3.0
Additional Counterweight For 236 And 246 Skid Steer Loaders Additional Counterweight For 236 And 246 Skid Steer Loaders
Remote Air Conditioner Condenser Repair Remote Air Conditioner Condenser Repair
Newly Updated EDC0630.Bin And ETC0550.Bin Flash Files Are Corrupt Newly Updated EDC0630.Bin And ETC0550.Bin Flash Files Are Corrupt
Complete Software Information Will Soon Be Available Complete Software Information Will Soon Be Available
The Premium Software Update Version 1.1 (Literature # YEXN0914) Will Conflict With Caterpillar Electronic Technician The Premium Software Update Version 1.1 (Literature # YEXN0914) Will Conflict With Caterpillar Electronic Technician
Probable Causes For Powering Down Problems Probable Causes For Powering Down Problems
Certain CS/CP-563C Compactors May Be Equipped With 12-Volt Electrical Relays Instead of 24-Volt Electrical Relays Certain CS/CP-563C Compactors May Be Equipped With 12-Volt Electrical Relays Instead of 24-Volt Electrical Relays
Proper Placement Of Hydraulic Jacks When Raising The Rear End Of Pneumatic Compactors Proper Placement Of Hydraulic Jacks When Raising The Rear End Of Pneumatic Compactors
PS-150/200B Canopies May Develop Stress Cracks PS-150/200B Canopies May Develop Stress Cracks
The Bolts In Some 106-3722 Suspension Cylinder Groups May Need To Be Tightened The Bolts In Some 106-3722 Suspension Cylinder Groups May Need To Be Tightened