Engine Data For Backhoe Loaders Caterpillar


Engine Data For Backhoe Loaders

Usage:

BACKHOE LOADERS416C (4ZN, 1WR, 5YN, 1XR),
426C (6XN, 1CR, 1YR, 1MR, 7WN, 1ER, 1ZR, 1NR),
428C (2CR, 8RN),
436C (9JN, 1GR, 2BR, 1RR, 8TN, 1FR, 2AR, 1PR),
438C (9KN, 1JR, 2DR, 1TR) BACKHOE LOADERS

Problem:

The specification data provided for the engines of backhoe loaders is listed in several sources and may conflict.

Solution:

See the following table for engine specifications. See Service Magazine, SEPD0483 8/2/99 issue, "Identify the Engine in a Backhoe Loader" page 7 in order to properly identify the engine.

NOTE: The data in the Table is only applicable to the usage of fuel mix 75% Kerosene and 25% #2 Diesel Fuel.

COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED

Caterpillar Information System:

Battery To Starter Motor Connection May Be Loose Battery To Starter Motor Connection May Be Loose
Troubleshooting MTS Belt Untracking Problems Troubleshooting MTS Belt Untracking Problems
Cab Roof Panel May Come Loose Cab Roof Panel May Come Loose
Possible Problems With Dash Lighting On 769D, Through 775D, 785C, 789C And 73C Off-Highway Trucks When The Horn Is Actuated Possible Problems With Dash Lighting On 769D, Through 775D, 785C, 789C And 73C Off-Highway Trucks When The Horn Is Actuated
New Software In Transmission Control (184-4671 Software Group) Offers New Parameters New Software In Transmission Control (184-4671 Software Group) Offers New Parameters
Leakage Of The 133-1863 Core Assembly ("Rear" Brake Oil Cooler) Leakage Of The 133-1863 Core Assembly ("Rear" Brake Oil Cooler)
Mechanical Control Vibration Level Reduction Mechanical Control Vibration Level Reduction
D250E And D300E Articulated Truck Steering System D250E And D300E Articulated Truck Steering System
Twisted Or Kinked Fuel Line May Cause Intermittent Engine Stalling Twisted Or Kinked Fuel Line May Cause Intermittent Engine Stalling
Service Door Latch On Engine Hood Service Door Latch On Engine Hood
793C Gear Pump Group May Have Lip Seals Improperly Installed 793C Gear Pump Group May Have Lip Seals Improperly Installed
Additional Counterweight Additional Counterweight
The Nuts And Bolts That Fasten The Engine Oil Filter Base To The Engine Cylinder Block May Be Loose The Nuts And Bolts That Fasten The Engine Oil Filter Base To The Engine Cylinder Block May Be Loose
Correction To Service Letter PS5571-Bevel Gear Rework Correction To Service Letter PS5571-Bevel Gear Rework
E-Stick Pedal Linkage Change E-Stick Pedal Linkage Change
Correct Installation Of Torque Converter Sleeve Bearing Correct Installation Of Torque Converter Sleeve Bearing
Park Brake Solenoid Valve Troubleshooting Procedure Park Brake Solenoid Valve Troubleshooting Procedure
Correction Of Torque For Bearing Support Bolts Correction Of Torque For Bearing Support Bolts
Bracket For Wheel Chocks Requires Welding At Installation Bracket For Wheel Chocks Requires Welding At Installation
VIMS-PC Version 2.4 Will Not Open After Installation Of Electronic Technician Version 3.0 VIMS-PC Version 2.4 Will Not Open After Installation Of Electronic Technician Version 3.0
Additional Counterweight For 236 And 246 Skid Steer Loaders Additional Counterweight For 236 And 246 Skid Steer Loaders
Remote Air Conditioner Condenser Repair Remote Air Conditioner Condenser Repair
Newly Updated EDC0630.Bin And ETC0550.Bin Flash Files Are Corrupt Newly Updated EDC0630.Bin And ETC0550.Bin Flash Files Are Corrupt
Complete Software Information Will Soon Be Available Complete Software Information Will Soon Be Available
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.