New Method for Shipping Mirrors for the Motor Graders Caterpillar

New Method for Shipping Mirrors for the Motor Graders

Usage:

New Method for Shipping Mirrors for the Motor Graders

CONFIDENTIAL TIBU2663-00

Show/hide table

TECHNICAL INFORMATION BULLETIN	June 04, 2003
Motor Graders	All Tier II Emissions Motor Graders
Component Code	7319

SUBJECT: New Method for Shipping Mirrors for the Motor Graders.

PROBLEM:

Some of the mirrors on the Motor Graders have been damaged during the shipping process.

SOLUTION:

Clamps
Screws

The mirrors for the Motor Graders will now be shipped as shown in the illustration. In order to reinstall the mirrors, loosen clamps (1). Rotate the mirror assembly into position. Tighten clamps (1). Remove screws (2). Remove the mirror. Reinstall the mirror in the normal operating position. Reinstall screws (2).

COPYRIGHT 2003 CATERPILLAR
ALL RIGHTS RESERVED

Caterpillar Information System:

Requesting Information on Motor Grader Films Requesting Information on Motor Grader Films

Use Only 6 Micron Filters on the Transmissions for the Newer Motor Graders Use Only 6 Micron Filters on the Transmissions for the Newer Motor Graders

777D Final Drive Wear on bearing and/or Thrust Plate 777D Final Drive Wear on bearing and/or Thrust Plate

HOIST CONTROL VALVE ELECTRICAL CONNECTORS MAY GET MATCHED INCORRECTLY HOIST CONTROL VALVE ELECTRICAL CONNECTORS MAY GET MATCHED INCORRECTLY

185-3628 ; 185-3629 STEERING SHAFTS MUST BE INSPECTED PRIOR TO INSTALLATION 185-3628 & 185-3629 STEERING SHAFTS MUST BE INSPECTED PRIOR TO INSTALLATION

The 192-7887 Guard That is Under the Right Hand Platform has been Removed The 192-7887 Guard That is Under the Right Hand Platform has been Removed

Certain Air Dryers Should be Removed From Dealer Inventory Certain Air Dryers Should be Removed From Dealer Inventory

There Is a New Shipping Configuration for the 777D There Is a New Shipping Configuration for the 777D

The New Body Up Switch Is Available For Quarry and Construction Trucks The New Body Up Switch Is Available For Quarry and Construction Trucks

A Pipe Assembly and A Handhold Have Been Removed from the Walkway Group A Pipe Assembly and A Handhold Have Been Removed from the Walkway Group

Additions to Service Maintenance Interval for Suspension Cylinders on Off-Highway Trucks Additions to Service Maintenance Interval for Suspension Cylinders on Off-Highway Trucks

2G-9000 RECEIVER USED IN THE WIGGINS FUEL SYSTEM MAY NOT FUCNTION PROPERLY 2G-9000 RECEIVER USED IN THE WIGGINS FUEL SYSTEM MAY NOT FUCNTION PROPERLY

Drive Shaft U-Joint Bolts May Not Have the Proper Torque on Certain Motor Graders Drive Shaft U-Joint Bolts May Not Have the Proper Torque on Certain Motor Graders

New Method of Engaging the Parking Brake on Motor Graders New Method of Engaging the Parking Brake on Motor Graders

Inspection of the Gear Pump for the Hoist on the 797 Off-Highway Trucks is Required Inspection of the Gear Pump for the Hoist on the 797 Off-Highway Trucks is Required

HYDRAULIC TANK FILLER TUBE STRAINER MAY RUST HYDRAULIC TANK FILLER TUBE STRAINER MAY RUST

Support Bracket for the Rotary Beacon Interferes With the Cab Support Bracket for the Rotary Beacon Interferes With the Cab

Spark Arrestor Muffler Failure Spark Arrestor Muffler Failure

THE MAGNETS ON THE 178-5062 MAGNETIC SCREEN MAY LOOSEN IN OPERATION THE MAGNETS ON THE 178-5062 MAGNETIC SCREEN MAY LOOSEN IN OPERATION

192-9969 BEARING AND 192-9970 BEARING MAY HAVE BEEN MANUFACTURED INCORRECTLY 192-9969 BEARING AND 192-9970 BEARING MAY HAVE BEEN MANUFACTURED INCORRECTLY

Two Lubrication Holes Have Been Omitted In the 7S-8580 Rotation Clutch Carrier Two Lubrication Holes Have Been Omitted In the 7S-8580 Rotation Clutch Carrier

Some 2P-4472, 7G-0825, and 8P-1656 Clutch Plates May Have Been Shipped Into the Parts System Before Finish Grinding Some 2P-4472, 7G-0825, and 8P-1656 Clutch Plates May Have Been Shipped Into the Parts System Before Finish Grinding

Logged Codes Must Be Cleared During Pre-delivery Inspections Logged Codes Must Be Cleared During Pre-delivery Inspections

THE ALTERNATOR PULLEY MAY BE ASSEMBLED INCORRECTLY THE ALTERNATOR PULLEY MAY BE ASSEMBLED INCORRECTLY